

CPC464-2MINIITX
Mini CPC464
- Size
- 170 × 170 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 243
- Nets
- 361
- Pads
- 1,589
- Tracks, vias
- 8,256, 638
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Nov 2023
- Updated
- 31 Mar 2024
Overview
CPC464-2MINIITX is an open-source printed circuit board by Board-Folk, from the Board-Folk/CPC464-2MINI repository on GitHub. It is a 2-layer board of 170 × 170 mm with 243 parts on 361 nets, routed with 8,256 tracks and 638 vias.
It is built around the ATMEGA328P-AU, 74HC240D and 74LS153DC, with the 74HCU04D, BCV49 and BC847 among its other parts. Its parts include 91 resistors, 57 capacitors, 43 ICs, 7 connectors and 4 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74HC240D
SO-20-300mil-40℃~+125℃ 1 11ns@4.5V,50pF 160uA 2V~6V 7.8mA 7.8mA 74HC 8 Tri-State Unidirectional SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver74LS153DC
PDIP-160℃~+70℃ 14ns 4.75V~5.25V 400uA 400uA 6.2mA 74LS Single Supply Tri-state output PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders74HCU04D
SO-14-40℃~+125℃ 1.7V~4.8V 1.8V、4V、5.5V 12ns@6V,50pF 200mV、260mV、500mV 2V~6V 2uA 300mV~1.2V 5.2mA 5.2mA 6 74HCU Push-pull StandardCMOS SO-14 Inverters ROHSNexperiaInvertersBCV49
SOT-89SOT-89 Darlington Transistors ROHSPJSEMIDarlington TransistorsBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)C1815
SOT-23-55℃~+150℃ 1 NPN 100nA 150mA 200 200mW 250mV 50V 5V 80MHz NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdCPC464-2MINI
A Mini CPC464
** Forever Work In Progress **

A miniaturised version of Amstrad CPC464 second release with extensions. The main intention to try replace as much DIP with SMD as practically possible and have it as small as reasonably possible, with a standard board footprint that can later fit a 3D printed case that doesn't change between revisions. Latest versions, with everything on them, function as a 6128. This project is very much a private hobby project for now and is for fun and elements may lack any valid reason. It's been uploaded because of general interest.
More of the project may be dropped in here over time, kind of a place to sort out what's happened if you like, and what's working. There have been that many revisions/expansions it's been getting hard to keep track so it's nice to have a place. Things may be flagged as broken or untested where cautiously uploaded.
Revisions
The current version of the main board is v5.3, which uses the AMSGateArray Xilinx based gate array replacement linked to in the links section below. Thank you to all involved with that for this amazing project. Versions v4 and before require an original Amstrad 40010 or 40007 gate array (with adapter) for operation. Use of a 40007 somewhat impares operation especially regarding memory and other expansion compatiblity. Please see the readme file in each revisions folder for version specific information.
Some Main Points
- Regulated 5V operation (centre terminal positive).
- The main board supports a full size original CPC464 Keyboard, not the later ones with the flat ribbon cables. An alternative PS/2 interface, which I expect most people will want to use is in the expansions folder.
- All releases still use 4164 RAM chips. Attempts at replacing these have so far failed due to the dual data bus (separate in and out pins are needed). Any help appreciated on this front, I can send schematics of my best guess so far which didn't work.
- All resistors and ceramic capacitors are 0805.
- Later revisions use PLCC32 instead of DIP28 for ROM due to space constraints.
- The v5 series board now also only supports the AY-3-8910 sound chip. Some earlier board supported the 8912, some both, the 8910 is much more readily available, also significantly cheaper. To note, you can't use an AY-3-8912 emulation board (well none that I've seen) with an Amstrad, they don't do the IO functions needed only sound.
- Some revisions of the board use a QFP44 Z80 not DIP40, including the latest revision, please check.
- Tape support changed for v5 on a different header needing an expansion card which hasn't been finished yet. Previous versions have a header compatible with the original 464 tape drive, and an adapter board for 3.5mm mono audio connections for a regular tape recorder/tapuino etc.
- There was a Mini-ITX version completed which included the disk interface (basically like a 6128), based on the pre-v5 boards in the Archive folder.
- As with original Amstrad CPCs of this generation, if you use the often more common A version AY-3-891x chip, e.g. AY-3-8910A you will need the SIP9 10K pullup resistor NR1 or your keyboard and joystick will not work correctly.
- All BOMs for now are just automatically generated iBOMs which only reflect the accuracy of the Kicad project they're from so be cautious.
- No, there's no HDMI port any of those other why didn't you things, feel free to add.
Expansions
Expansion boards will be added over time. I'll try to place a big note in each readme which boards have not been tested. You'll probably want the Edge Connector, MINIDDI and PS/2 interfaces, but also check out the expansions folder.
Internal expansion boards stack vertically over a 2x25 pin header. Be warned, the rows for this are inverted from common secondary 6128 expansion cards that may already exist, though they typically need expansion adapter boards anyway for which there is one for this board. As things are at the moment each expansion card presents two headers for this to allow more options for stacking if you can't find the right socket/headers to stack directly. The primary expansions are:
- PS/2
An ATMEGA328/MT8816 based PS/2 adapter interface that mounts on the left of the board so you don't need an original keyboard.
- MINIEdge Edge Connector
It was decided that the main board wasn't going to include the original Amstrad edge connector as intended the expansions would be all neat and internal. The edge connector board solders on to the expansion connector on the base to provide the edge connector for traditional CPC expansions. This also has the virtue that the main board doesn't need ENIG, only this.
- MINIDDI
A version of the DDI-1 interface modified with the feelings of a 6128 and PPC640 to providing a 3.5" disk or Gotek drive interface. There's an adapter board for 3" drives.
** Check out the expansions folder for everything so far **
Credits
Many thanks to Rob Taylor @peepouk and Chrissy @chris_jh with whom this project started, Richard Fry, Ian Stocks and the rest of the Board Folk Team. Special thanks to Noel Llopis for his amazing test ROM which has been invaluable for fixing buggy boards along the way.
Links
AMSGateArray Gate Replacement Project
Noel's Amstrad Diagnostics Test Suite
Parts
243| Qty | Value | Footprint | References |
|---|---|---|---|
| 41 | 100nF | Capacitor_SMD:C_0805_2012Metric | C102, C104, C113, C114, C115, C116, C117, C118, C120, C121, C122, C123, C124, C125, C126, C1070 +25 |
| 16 | 4164 | Package_DIP:DIP-16_W7.62mm | IC117, IC118, IC119, IC120, IC121, IC122, IC123, IC124, IC701, IC702, IC703, IC704, IC705, IC706, IC707, IC708 |
| 14 | 10K | Resistor_SMD:R_0805_2012Metric | R114, R115, R116, R117, R120, R133, R142, R310, R314, R417, R804, R805, R1070, R1071 |
| 13 | 2K2 | Resistor_SMD:R_0805_2012Metric | R102, R103, R104, R105, R106, R107, R108, R109, R110, R112, R318, R414, R453 |
| 13 | 680R | Resistor_SMD:R_0805_2012Metric | R125, R127, R129, R135, R157, R158, R402, R403, R404, R405, R406, R452, R458 |
| 12 | 1K | Resistor_SMD:R_0805_2012Metric | R121, R122, R123, R132, R140, R316, R411, R412, R416, R900, R901, R1073 |
| 9 | 82R | Resistor_SMD:R_0805_2012Metric | R141, R146, R147, R148, R149, R150, R151, R152, R153 |
| 4 | 74LS153D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | IC104, IC105, IC109, IC113 |
| 4 | MountingHole | CPC464-MINI:Hole3.81_Pad_Via | HA1, HA2, HA3, HA4 |
| 3 | 1K5 | Resistor_SMD:R_0805_2012Metric | R124, R456, R808 |
| 3 | 220pF | Capacitor_SMD:C_0805_2012Metric | C133, C134, C135 |
| 3 | 270R | Resistor_SMD:R_0805_2012Metric | R126, R128, R130 |
| 3 | 47R | Resistor_SMD:R_0805_2012Metric | R156, R160, R161 |
| 3 | 4K7 | Resistor_SMD:R_0805_2012Metric | R144, R313, R315 |
| 2 | 10M | Resistor_SMD:R_0805_2012Metric | R143, R145 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C455, C456 |
| 2 | 16MHz | Crystal:Crystal_HC49-U_Vertical | X101, Y800 |
| 2 | 1N4148 | Diode_SMD:D_SOD-123 | D101, D401 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | C800, C801 |
| 2 | 220R | Resistor_SMD:R_0805_2012Metric | R136, R137 |
| 2 | 22K | Resistor_SMD:R_0805_2012Metric | R118, R119 |
| 2 | 68pF | Capacitor_SMD:C_0805_2012Metric | C130, C131 |
| 2 | 74LS132D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC110, IC410 |
| 2 | 74LS32D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC112, IC407 |
| 2 | 74LS38D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC406, IC408 |
| 2 | BCV49 | Package_TO_SOT_SMD:SOT-89-3 | Q800, Q1070 |
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad | H1, H7 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R1072 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R134 |
| 1 | 100uF 25V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C101 |
| 1 | 10K | Resistor_THT:R_Array_SIP9 | NR1 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric | R418 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R111 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C454 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric | R455 |
| 1 | 33uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C1071 |
| 1 | 3K3 | Resistor_SMD:R_0805_2012Metric | R131 |
| 1 | 3M3 | Resistor_SMD:R_0805_2012Metric | R101 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C317 |
| 1 | 40010 | Package_DIP:DIP-40_W15.24mm | IC116 |
| 1 | 40031 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | IC900 |
| 1 | 470K | Resistor_SMD:R_0805_2012Metric | R317 |
| 1 | 47nF | Capacitor_SMD:C_0805_2012Metric | C453 |
| 1 | 47pF | Capacitor_SMD:C_0805_2012Metric | C132 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C351 |
| 1 | 56R | Resistor_SMD:R_0805_2012Metric | R155 |
| 1 | 68K | Resistor_SMD:R_0805_2012Metric | R454 |
| 1 | 6K8 | Resistor_SMD:R_0805_2012Metric | R457 |
| 1 | 74HC240D | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | IC403 |
| 1 | 74HCU04D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC125 |
| 1 | 74LS08 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC901 |
| 1 | 74LS08D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC405 |
| 1 | 74LS136D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC409 |
| 1 | 74LS145D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | IC101 |
| 1 | 74LS244DW | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | IC115 |
| 1 | 74LS27D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC411 |
| 1 | 74LS373DW | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | IC114 |
| 1 | 74LS74D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC412 |
| 1 | 765FDC | Package_DIP:DIP-40_W15.24mm | IC401 |
| 1 | 820K | Resistor_SMD:R_0805_2012Metric | R459 |
| 1 | 8255A | Package_DIP:DIP-40_W15.24mm | IC107 |
| 1 | 9 PIN D | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J102 |
| 1 | ATX-24 | Connector_Molex:Molex_Mini-Fit_Jr_5566-24A_2x12_P4.20mm_Vertical | J901 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | IC800 |
| 1 | AY-3-8912 | Package_DIP:DIP-28_W15.24mm | IC102 |
| 1 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q350 |
| 1 | C1815 | Package_TO_SOT_SMD:SOT-23 | Q102 |
| 1 | DC INPUT | Connector_BarrelJack:BarrelJack_Horizontal | J104 |
| 1 | DISC ROM | Package_DIP:DIP-28_W15.24mm | IC404 |
| 1 | EAR | CPC464-MINI:STEREO | J351 |
| 1 | EXPANSION CONNECTOR 50 WAY | CPC464-MINI:EXPANSION_IDC_ANONYMISED | PL1 |
| 1 | FAN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J903 |
| 1 | ISP6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J800 |
| 1 | KBPWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J105 |
| 1 | KEYBOARD | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | CP2 |
| 1 | LK1 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | LK1 |
| 1 | LK2 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | LK2 |
| 1 | LK3 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | LK3 |
| 1 | LK4 | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | LK4 |
The 221 most common of 243 parts.
More from Board-Folk/CPC464-2MINI
12- 2 layers246 × 85 mm

- 2 layers246 × 85 mm

- 2 layers246 × 85 mm

- 2 layers93.4 × 80.2 mm

- 2 layers93.4 × 97.9 mm

- 2 layers93.4 × 85 mm

- 2 layers54.1 × 48 mm

- 2 layers24.7 × 67.6 mm

- 2 layers93.4 × 85 mm

- 2 layers25.7 × 43.2 mm

- 2 layers56.8 × 31.1 mm

- 2 layers23.6 × 57.2 mm

Similar boards
- 2 layers320.7 × 155.8 mm

- 2 layers81.1 × 33.6 mm

- 4 layers44.7 × 71.1 mm

- 2 layers88.4 × 25.4 mm

- 4 layers118 × 88 mm

Vinyl adc rev e
MadsRudolph/vinyl-adc
Discrete 3rd-order delta-sigma stereo audio ADC, built from op-amps and logic gates: a four-layer Raspberry Pi HAT made by PCBWay, with KiCad files, SPICE simulations and measurements
184 parts1 - 4 layers138.4 × 138.3 mm

GRBL board
ephemeridis/GRBL_board
This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.
287 parts2GPL-3.0 - 2 layers93 × 63 mm

- 2 layers100 × 100 mm

Questions
How big is the CPC464-2MINIITX PCB?
It measures 170 × 170 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CPC464-2MINIITX use?
243 parts, built around the ATMEGA328P-AU, 74HC240D, 74LS153DC and 74HCU04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CPC464-2MINIITX KiCad files?
From the Board-Folk/CPC464-2MINI repository on GitHub, at the commit this page was made from: the board is Archive/MINIITXv1.2/Kicad/CPC464-2MINIITX.kicad_pcb and its schematic Archive/MINIITXv1.2/Kicad/CPC464-2MINIITX.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CPC464-2MINIITX design in my own project?
Its repository states no licence, so its author keeps all rights: ask Board-Folk before reusing the design.