2 layers160 × 100 mm
Pm1p8V pm5V 5Vref 5Vlaser
scular-HCC/DualLaserPDHDriver
Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference
103 parts
2 layers68.8 × 48.6 mm
MSS Crossover Tiny
dabridgham/MSS-Crossover-TinyAn MSS Crossover Node
- Size
- 68.8 × 48.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 28
- Pads
- 105
- Tracks, vias
- 157, 31
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Feb 2025
- Updated
- 6 Sep 2025
Overview
MSS Crossover Tiny is an open-source printed circuit board by dabridgham, from the dabridgham/MSS-Crossover-Tiny repository on GitHub. It is a 2-layer board of 68.8 × 48.6 mm with 36 parts on 28 nets, routed with 157 tracks and 31 vias.
It is built around the ATTINY25-20SSU, INA180A1IDBVR(LX) and TLP187, with the AMS1117-3.3, CL21B104KBCNNNC and MJ3221-88-0 among its other parts. Its parts include 7 connectors, 6 capacitors, 5 resistors, 5 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
11
ATTINY25-20SSU
SOIC-8-40℃~+85℃ 10bit 128Byte 2.7V~5.5V 20MHz 2KB 6 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
INA180A1IDBVR(LX)
SOT-23-5-200mV~30V -40℃~+125℃ 1 100dB 100uV 175uA 1uV/℃ 2.7V~5.5V 20V/V 2V/us 350kHz 40nV/√Hz@1kHz 75uA 8mA Bidirectional detection、Zero drift / auto-zero ±30V SOT-23-5 Current Sense Amplifiers ROHSlingxingicCurrent Sense Amplifiers
TLP187
SOIC4Photocoupler GaAlAs Infrared Led & Photo Darlington TransistorToshibaUncategorised
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CL21B104KBCNNNC
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTMJ3221-88-0
插件Ethernet Connectors / Modular Connectors (RJ45 RJ11)Global Connector Technology (GCT)CL21B334KBFNNNE
0805330nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
CRA2512-FZ-R100ELF
2512-55℃~+170℃ 100mΩ 3W ±1% ±50ppm/℃ 2512 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface Mount
EEV107M035A9HAA
SMD,D6.3xL7.7mm-55℃~+105℃ 100uF 2000hrs@105℃ 280mA@100kHz 340mΩ@100kHz 35V Polarized ±20% SMD,D6.3xL7.7mm Aluminum Electrolytic Capacitors - SMD ROHSKEMETAluminum Electrolytic Capacitors - SMD
DF04S
SDIP-4-55℃~+150℃ 1.1V@1.5A 1.5A 400V 50A 5uA@400V Single-Phase Rectifier SDIP-4 Bridge Rectifiers ROHSonsemiBridge Rectifiers
LTST-C170KRKT
0805-55℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red Water Clear 0805 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Screw_Terminal_01x02 | Imports:CUI_TB003-500-P02BE | J3, J4, J5, J7 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7 |
| 3 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R7 |
| 2 | MSS 7 | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | RJ45 | myMods:MJ3221-88 | J1, J2 |
| 2 | TLP187 | Package_SO:SOIC-4_4.55x3.7mm_P2.54mm | U1, U4 |
| 1 | .33µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 0.1Ω | Resistor_SMD:R_2512_6332Metric | R8 |
| 1 | 100µF | Capacitor_SMD:CP_Elec_6.3x7.7 | C1 |
| 1 | 22 µF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_HandSolder | C4 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | ATtiny25-20SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | DF04S | Diode_SMD:Diode_Bridge_Vishay_DFS | D1 |
| 1 | GND | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |
| 1 | INA180A3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | ISP (3V3) | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J6 |
| 1 | LOGO | myMods:Free-moNH-20 | G*** |
| 1 | Set | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | V+ | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP3 |
| 1 | det | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP2 |
| 1 | red | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
The 32 most common of 36 parts.
Questions
How big is the MSS Crossover Tiny PCB?
It measures 68.8 × 48.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MSS Crossover Tiny use?
36 parts, built around the ATTINY25-20SSU, INA180A1IDBVR(LX), TLP187 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MSS Crossover Tiny KiCad files?
From the dabridgham/MSS-Crossover-Tiny repository on GitHub, at the commit this page was made from: the board is mss-crossover-tiny.kicad_pcb and its schematic mss-crossover-tiny.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MSS Crossover Tiny design in my own project?
Its repository states no licence, so its author keeps all rights: ask dabridgham before reusing the design.
Similar boards
- 2 layers50.8 × 59.8 mm
- 4 layers449.2 × 272.9 mm
Wpc power driver cost
lolz0r/Williams-WPC-Power-Driver-Board-A-12697-3
Untested, unverifed, AI created design.
453 parts2 - 2 layers196 × 176 mm
- 2 layers74.5 × 20 mm
E Field Igniter Daughterboard
inceptionev/PlasmaTransformer
This project mainly focuses on creating a driver and 3D-printed support structure that allows for safe continuous operation of a plasma toroid.
21 parts14 - 4 layers40 × 40 mm
STMF765 Flight Controller
MatthiasGeorgImhof/STMF765_Flight_Controller
A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.
235 parts1 - 2 layers100 × 80 mm
- 2 layers8 × 56 mm
