
Keep breathing ctrl
CV19CO/open_controller_for_ventilator
Open source controller for ventilators

Open source controller for ventilators
Sensor oxigeno is an open-source printed circuit board by CV19CO, from the CV19CO/open_controller_for_ventilator repository on GitHub. It is a 4-layer board of 29 × 35 mm with 12 parts on 21 nets, routed with 49 tracks and 0 vias.
It is built around the INA128U and LM318N. Its parts include 7 resistors, 3 connectors and 2 ICs. It belongs with the sensors and measurement boards of this library.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5, R6 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 25.3 k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 50 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | Conn_01x02_Female | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J2 |
| 1 | INA128 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | LM318N | Package_DIP:DIP-8_W7.62mm | U1 |

CV19CO/open_controller_for_ventilator
Open source controller for ventilators

CV19CO/open_controller_for_ventilator
Open source controller for ventilators

CV19CO/open_controller_for_ventilator
Open source controller for ventilators

CV19CO/open_controller_for_ventilator
Open source controller for ventilators

CV19CO/open_controller_for_ventilator
Open source controller for ventilators

CV19CO/open_controller_for_ventilator
Open source controller for ventilators

CV19CO/open_controller_for_ventilator
Open source controller for ventilators

Huaqiu-Electronics/kicad
For specific documentation about building KiCad, policies and guidelines, and source code documentation see the Developer Documentation website.

andres-garcia-alves/electronics-laboratory-psu-lm2596-ic
Electronic adjustable laboratory power supply unit based on LM2596-ADJ. Output 1.4-33V@2.5A, with current limitation feature.

filezz/Free-Space-Optics-Audio-transmission-system
A hardware project that successfully transmits an analog audio signal over a laser beam using Amplitude Modulation (AM).




Jack05325/ProgrettiHensemberger
Benvenuto in questa repository! Qui troverai una raccolta di progetti che ho realizzato per l'ITI P. Hensemberger.

It measures 29 × 35 mm and has 4 copper layers, 1.6 mm thick.
12 parts, built around the INA128U and LM318N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CV19CO/open_controller_for_ventilator repository on GitHub, at the commit this page was made from: the board is sensor_oxigeno/sensor_oxigeno.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CV19CO before reusing the design.