
Custom pads test
Huaqiu-Electronics/kicad
For specific documentation about building KiCad, policies and guidelines, and source code documentation see the Developer Documentation website.

For specific documentation about building KiCad, policies and guidelines, and source code documentation see the Developer Documentation website.
Carte test is an open-source printed circuit board by Huaqiu-Electronics, from the Huaqiu-Electronics/kicad repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 101.6 × 99.7 mm with 42 parts on 100 nets, routed with 647 tracks and 12 vias.
It is built around the LM318N, 74HC04D and LM7805. Its parts include 13 capacitors, 10 resistors, 6 ICs, 5 connectors and 4 diodes. It belongs with the FPGA and CPLD boards of this library.
For specific documentation about building KiCad, policies and guidelines, and source code documentation see the Developer Documentation website.
You may also take a look into the Wiki, the contribution guide.
For general information about KiCad and information about contributing to the documentation and libraries, see our Website and our Forum.
KiCad uses a host of CI resources.
GitLab CI pipeline status can be viewed for Linux and Windows builds of the latest commits.
The Windows installation package can be downloaded directly using the following link: https://www.eda.cn/data/kicad-release/kicad-huaqiu-8.0.6-x86_64.exe.zip
The Linux version requires Flatpak installation
sudo apt install flatpak
flatpak remote-add --user repo https://kicaddownload.elecfans.com/kicadhuaqiu_v9.0.0
Check whether the addition succeeds:
flatpak remote-ls repo
If GPG verification is reported, go to Step 4. Otherwise, skip it
vim ~/.local/share/flatpak/repo/config
Modify in the file:
gpg-verify=false
flatpak remote-modify --no-gpg-verify repo
Check whether the addition is successful:
flatpak remote-ls repo
flatpak install repo org.kicad.KiCad
If no dependency is reported, go to the next step "6".
sudo flatpak remote-modify flathub --url=https://mirror.sjtu.edu.cn/flathub
In case of lack org.freedesktop.Sdk/x86_64/23.08:
flatpak install flathub org.freedesktop.Sdk/x86_64/23.08
In case of lack org.freedesktop.Sdk//23.08:
flatpak install flathub org.freedesktop.Sdk//23.08
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | footprints:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C7, C8, C10, C11, C12 |
| 4 | 10uF | footprints:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C2, C3, C13, C14 |
| 2 | 1N4004 | footprints:D_DO-35_SOD27_P12.70mm_Horizontal | D1, D4 |
| 2 | 2,2K | footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9 |
| 2 | 22pF | footprints:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5 |
| 2 | 330 | footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 4,7K | footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 2 | LED | footprints:LED_D5.0mm | D2, D3 |
| 2 | SW_PUSH | footprints:SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 1 | 1,1K | footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 1,1k | footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 100K | footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10MHz | footprints:Crystal_HC18-U_Horizontal | X1 |
| 1 | 47uF | footprints:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C6 |
| 1 | 74HC04 | footprints:DIP-14_W7.62mm_LongPads | U4 |
| 1 | 75 | footprints:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | CONN_2 | footprints:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | P3 |
| 1 | CONN_2X2 | footprints:PinHeader_2x02_P2.54mm_Vertical | P4 |
| 1 | CONN_3 | footprints:PinHeader_1x03_P2.54mm_Vertical | K1 |
| 1 | CONN_3 | footprints:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | P2 |
| 1 | DB25 | footprints:DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J1 |
| 1 | DB9FEM | footprints:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J2 |
| 1 | LM318N | footprints:DIP-8_W7.62mm_LongPads | U6 |
| 1 | LM7805 | footprints:TO-220-3_Horizontal_TabDown | U3 |
| 1 | RAM_32KO | footprints:DIP-28__300__600_ELL | U5 |
| 1 | TDA8702 | footprints:DIP-16_W7.62mm_Socket_LongPads | U1 |
| 1 | XC95108PC84 | footprints:PLCC84 | U2 |

Huaqiu-Electronics/kicad
For specific documentation about building KiCad, policies and guidelines, and source code documentation see the Developer Documentation website.



andres-garcia-alves/electronics-laboratory-psu-lm2596-ic
Electronic adjustable laboratory power supply unit based on LM2596-ADJ. Output 1.4-33V@2.5A, with current limitation feature.

filezz/Free-Space-Optics-Audio-transmission-system
A hardware project that successfully transmits an analog audio signal over a laser beam using Amplitude Modulation (AM).




Jack05325/ProgrettiHensemberger
Benvenuto in questa repository! Qui troverai una raccolta di progetti che ho realizzato per l'ITI P. Hensemberger.
It measures 101.6 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the LM318N, 74HC04D and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Huaqiu-Electronics/kicad repository on GitHub, at the commit this page was made from: the board is demos/test_xil_95108/carte_test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).