4 layers153 × 148 mm
Keep breathing ctrl
CV19CO/open_controller_for_ventilator
Open source controller for ventilators
260 parts5
4 layers153 × 148 mm
Keep breathing ctrl
CV19CO/open_controller_for_ventilator5Open source controller for ventilators
- Size
- 153 × 148 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 226
- Nets
- 237
- Pads
- 973
- Tracks, vias
- 2,037, 383
- Pours
- 35
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Apr 2020
- Updated
- 5 Apr 2023
Overview
Keep breathing ctrl is an open-source printed circuit board by CV19CO, from the CV19CO/open_controller_for_ventilator repository on GitHub. It is a 4-layer board of 153 × 148 mm with 226 parts on 237 nets, routed with 2,037 tracks and 383 vias.
It is built around the ICE40UP5K-SG48ITR50, STM32F427VIT6 and XCL214B333DR, with the XCL206B123AR-G, HTS221 and MPL3115A2R1 among its other parts. Its parts include 65 capacitors, 55 resistors, 21 ICs, 11 diodes and 11 transistors. It belongs with the STM32 and FPGA and CPLD boards of this library.
Main components
12
ICE40UP5K-SG48ITR50
QFN-48QFN-48 Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)
STM32F427VIT6
LQFP-100(14x14)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 180MHz 256KB 2MB 32 Bit 82 ARM Cortex-M4 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)XCL214B333DR
PowerTFQFN-91 1.5A 2.7V~5.5V 3.3V 92% PowerTFQFN-9 DC-DC Power Modules ROHSTorex SemiconductorDC-DC Power Modules
XCL206B123AR-G
CL-2025CL-2025 DC-DC Converters ROHSTorex SemiconductorDC-DC Converters
HTS221
HLGA-6(2x2)-40℃~+120℃ 0%RH~100%RH 1.7V~3.6V 16bit 2uA I2C、SPI ±0.5℃ ±3.5%RH HLGA-6(2x2) Temperature and Humidity Sensor ROHSSTMicroelectronicsTemperature And Humidity Sensor
MPL3115A2R1
LGA-8(3x5)-40℃~+85℃ 0.05Kpa 0.4Kpa 1.95V~3.6V 1s 2uA 50Kpa~1.1bar I2C LGA-8(3x5) Pressure Sensors ROHSNXP SemiconductorsPressure Sensors
TLP240D(F
DIP-41.27V 100us 1ms 200V 250mA 5kV 5Ω One set normally open: 2A (SPST - normally open) DIP-4 Solid State Relays (MOS Output) ROHSToshibaSolid State Relays (MOS Output)AQH3223AX
SMD-8P0V~600V 1 Form A (SPST-NO) 1.2A SMD-8P Solid State Relays (Triac Output) ROHSPanasonicPhotoelectric Thyristor (Solid State Relays)
TLP291-4
SOIC16Quad Channel Optocoupler, Phototransistor OutputToshibaUncategorised
PCF8523TK/1
XSON-8-EP(4x4)150nA 1V~5.5V Backup power management and battery charging、Alarm function、Sleep/Wake control Built-in I2C Yes XSON-8-EP(4x4) Real Time Clocks ROHSNXP SemiconductorsReal Time Clocks
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
PN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)
README
README.mdOpen source controller board for ventilators
Parts
226| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C26, C29, C30, C38, C54, C55, C56, C57, C58, C59, C60, C61, C62, C63, C64, C65 +10 |
| 12 | 100 | Resistor_SMD:R_0402_1005Metric | R13, R28, R32, R37, R38, R40, R41, R46, R47, R48, R49, R52 |
| 11 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11 |
| 9 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R29, R30, R31, R33, R34, R50, R51, R53 |
| 9 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical_SMD | G0, G1, G2, G3, G4, G5, G6, G7, G8 |
| 9 | Conn_02x07_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x07_P2.54mm_Vertical_SMD | S0, S1, S2, S3, S4, S5, S6, S7, S8 |
| 8 | 200 | Resistor_SMD:R_0402_1005Metric | R16, R17, R18, R19, R20, R21, R23, R61 |
| 7 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R42, R43, R44, R45, RST1, RST2 |
| 7 | Conn_01x04_Female | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | RL1, RL2, RL3, RL4, RL5, RL6, RL11 |
| 6 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | RJ1, RJ2, RJ3, RJ4, RJ5, RJ6 |
| 6 | TLP240D | SMD:TLP240D_TP1 | U3, U4, U5, U6, U7, U8 |
| 5 | 0.1u | Resistor_SMD:R_0402_1005Metric | C43, C45, C48, C49, C52 |
| 4 | 0.1u 250V | Capacitor_SMD:C_1210_3225Metric | C27, C28, C76, C77 |
| 4 | 100 1/2W | Resistor_SMD:R_0612_1632Metric | R26, R27, R56, R59 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D1, D1, D1 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C39, C39, C39, C39 |
| 4 | 22 | Resistor_SMD:R_0402_1005Metric | R35, R36, R57, R60 |
| 4 | 4.7u | Resistor_SMD:R_0603_1608Metric | C46, C50, C51, C53 |
| 4 | AQH3223AX | SMD:AQH3223A | U11, U12, U19, U20 |
| 4 | Conn_01x04_Female | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | RL7, RL8, RL9, RL10 |
| 4 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q8, Q8, Q8, Q8 |
| 4 | PN2222 | SMD:SOT23_Transistor | Q1, Q2, Q6, Q7 |
| 4 | TLP291 | Package_SO:SOIC-4_4.55x2.6mm_P1.27mm | U2, U2, U2, U2 |
| 3 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C19, C42, C44 |
| 3 | 100nF | Capacitor_SMD:C_0402_1005Metric | C15, C31, C32 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C41, C75, C78 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R24, R25, R55 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D8, D9, D11 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C16, C18 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C17, CST2 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | CST3, CST4 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | CXST1, CXST2 |
| 2 | 2A 120 ohm | Resistor_SMD:R_0603_1608Metric | LST1, LST2 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R22, R58 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C47, C73 |
| 2 | 4pF | Capacitor_SMD:C_0402_1005Metric | C23, C25 |
| 1 | 1SS389,L3F | Diode_SMD:D_SOD-523 | D7 |
| 1 | STM32F427VIT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | UST1 |
| 1 | XCL206B123 | SMD:CL-2025-02 | U18 |
| 1 | 100nF | Resistor_SMD:R_0402_1005Metric | C72 |
| 1 | 100uF | Resistor_SMD:R_1206_3216Metric | C20 |
| 1 | 180 | Resistor_SMD:R_0402_1005Metric | R54 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D10 |
| 1 | 2SC3325-Y | SMD:2SC3325-Y | Q5 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C40 |
| 1 | 450 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 47uF | Resistor_SMD:R_0603_1608Metric | C21 |
| 1 | 500 | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | ABM8G | SMD:ABM8G | X1 |
| 1 | ABS06-107-32.768KHZ-T | SMD:ABS06-107 | Y1 |
| 1 | BCM857BS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q4 |
| 1 | CDBU0520 | Diode_SMD:D_SOD-523 | D4 |
| 1 | CONN_RASPBERRY | SMD:SMD_CONN_2x20 | P1 |
| 1 | CSS-95B30-SMT | SMD:CUI_CSS-95B30-SMT | LS1 |
| 1 | Conn_01x03 | TH:10142708-08200LF | PWR1 |
| 1 | Conn_01x04_Female | Connector_Phoenix_MSTB:PhoenixContact_MSTB_2,5_2-GF_1x02_P5.00mm_Horizontal_ThreadedFlange_MountHole | P2 |
| 1 | Conn_02x04_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Horizontal | J1 |
| 1 | Conn_02x11_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x11_P2.54mm_Vertical | J3 |
| 1 | DMG2305UX | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | Ferrite_Bead_Small | Resistor_SMD:R_0603_1608Metric | FB1 |
| 1 | GD25Q32CTIGR-Memory_Flash | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U15 |
| 1 | HTS221 | SMD:HLGA-6L | U13 |
| 1 | ICE40UP5K-SG48ITR | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U14 |
| 1 | JUWT1105MCD | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C24 |
| 1 | MF-MSMF250/X | SMD:PTC | F1 |
| 1 | MPL3115A2 | SMD:8LGA | U1 |
| 1 | PCF8523TK | SMD:HVSON8 | U10 |
| 1 | SMBJ5.0A-TR | SMD:DO-214AA | D6 |
| 1 | XCL214B333 | SMD:TOREX_XCL214B123DR | U9 |
More from CV19CO/open_controller_for_ventilator
7- 4 layers100 × 100 mm
Pressure sensors
CV19CO/open_controller_for_ventilator
Open source controller for ventilators
145 parts5 - 4 layers29 × 35 mm
- 4 layers29 × 29.5 mm
Pressure sensor module
CV19CO/open_controller_for_ventilator
Open source controller for ventilators
10 parts5 - 4 layers29 × 29.5 mm
ABPDANT060MGAA5 sensor module
CV19CO/open_controller_for_ventilator
Open source controller for ventilators
9 parts5 - 2 layers45.6 × 25.3 mm
Electrovalves module
CV19CO/open_controller_for_ventilator
Open source controller for ventilators
8 parts5 - 4 layers29 × 29.5 mm
ABPDJJT001PDSA3 sensor module
CV19CO/open_controller_for_ventilator
Open source controller for ventilators
4 parts5
Similar boards
- 4 layers105 × 72 mm
- 2 layers67 × 45 mm
- 4 layers48.8 × 55.3 mm
- 4 layers46.1 × 45.6 mm
Avionics mainboard
AFS-pt/PROMETHEUS-1
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1
202 parts15 - 2 layers100 × 70 mm
- 2 layers85 × 20 mm
- 4 layers58.5 × 72.5 mm
- 2 layers25.4 × 17.8 mm
HTS221
vul-os/sirboard
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
28 parts56Apache-2.0
Questions
How big is the Keep breathing ctrl PCB?
It measures 153 × 148 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Keep breathing ctrl use?
226 parts, built around the ICE40UP5K-SG48ITR50, STM32F427VIT6, XCL214B333DR and XCL206B123AR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keep breathing ctrl KiCad files?
From the CV19CO/open_controller_for_ventilator repository on GitHub, at the commit this page was made from: the board is pcb_2.0/keep_breathing_ctrl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keep breathing ctrl design in my own project?
Its repository states no licence, so its author keeps all rights: ask CV19CO before reusing the design.