

Daq griffin
This is the pcb used to read up to 12 4-20mA pressure transcievers that are used on the white giant engine
- Size
- 120 × 120 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 223
- Nets
- 162
- Pads
- 723
- Tracks, vias
- 962, 166
- Pours
- 50
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Nov 2024
- Updated
- 12 Jun 2026
Overview
Daq griffin is an open-source printed circuit board by cuspaceflight, from the cuspaceflight/white-giant-sensing-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 120 × 120 mm with 223 parts on 162 nets, routed with 962 tracks and 166 vias.
It is built around the TCAN3414D, TEENSY 4.1 and TLV70933PKR, with the TPS54302 and BAV99 among its other parts. Its parts include 67 resistors, 60 capacitors, 46 connectors, 17 ICs and 13 fuses. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5TCAN3414D
SOIC-8-40℃~+125℃ 1 17uA 3V~3.6V 42mA 5Mbps CAN FD Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedTLV70933PKR
SOT-89-3-40℃~+125℃@(Tj) 1 150mA 1V@(150mA) 3.2uA 3.3V 30V 487uVrms 90dB@(100kHz) Fixed Over Current Protection、Built-in soft-start Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsUncategorisedTPS54302
UncategorisedTexas InstrumentsBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
README
README.mdWG-sensing-pcb
This PCB was designed for instrumentation, and potentially control, of the White Giant Engine. It also serves as an exemplary board from which later instrumentation and control PCB's may be derived and implified.
Parts
223| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C60, C62, C64, C66, C68, C70, C72, C74, C76, C78, C100, C102, C104, C106, C107, C113 +10 |
| 24 | 28 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R57, R58, R61, R62, R65, R66, R69, R70, R73, R74, R77, R78, R81, R82, R101, R102 +8 |
| 24 | SENSOR | Connector_Molex:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J1, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23 +8 |
| 13 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C59, C63, C67, C71, C75, C79, C83, C87, C91, C95, C99, C103 |
| 12 | 0.1-0.47 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R56, R60, R64, R68, R72, R76, R80, R84, R88, R92, R96, R100 |
| 12 | 20nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C61, C65, C69, C73, C77, C81, C85, C89, C93, C97, C101, C105 |
| 12 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R130, R131, R132, R133, R134, R135, R136, R137, R138, R139, R140, R141 |
| 12 | 250 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R55, R59, R63, R67, R71, R75, R79, R83, R87, R91, R95, R99 |
| 12 | 30mA | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24 |
| 12 | ADS8866 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23, U24 |
| 12 | BAV99 | Package_TO_SOT_SMD:SOT-323_SC-70 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 9 | POWER_24V | Connector_Molex:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J28, J29, J30, J31, J32, J33, J34, J35, J36 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C5, C110, C111, C112 |
| 6 | Conn_01x04_Socket | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J37, J38, J39, J40, J41, J42 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C108 |
| 2 | Conn_01x03_Socket | Connector_Molex:Molex_Nano-Fit_105309-xx03_1x03_P2.50mm_Vertical | J45, J46 |
| 2 | UART Header | Connector_Molex:Molex_Nano-Fit_105309-xx04_1x04_P2.50mm_Vertical | J43, J44 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 105k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R103 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R116 |
| 1 | 12k4 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 15uH 3A | Inductor_SMD:L_Bourns_SRN6045TA | L1 |
| 1 | 49.9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 511k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 75pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | CAN Header | Connector_Molex:Molex_Nano-Fit_105309-xx04_1x04_P2.50mm_Vertical | J27 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | I2C Header | Connector_Molex:Molex_Nano-Fit_105309-xx04_1x04_P2.50mm_Vertical | J26 |
| 1 | POWER_12V | Connector_Molex:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J25 |
| 1 | REF6050xDGK | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U29 |
| 1 | TCAN3414 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U55 |
| 1 | TLV70933 | Package_TO_SOT_SMD:SOT-23 | U30 |
| 1 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U25 |
| 1 | Teensy4.1 | teensy:Teensy41 | U26 |
Similar boards
- 4 layers90 × 80 mm

- 4 layers100 × 100 mm

Tankervision pdb
ikeefe12/tankervision-pdb
Four-layer KiCad power distribution board for the TankerVision robot: USB-C PD / barrel-jack input, supercapacitor-backed rail for clean Jetson shutdown, and four firmware-controlled protected output ports.
452 parts - 8 layers50 × 50 mm

Omodri laas
open-dynamic-robot-initiative/open-motor-driver-initiative
Open-source drive for brushless motors, following the open dynamic robot initiative
265 parts122BSD-3-Clause - 4 layers80 × 80 mm

- 4 layers80 × 80 mm

- 4 layers77 × 61.5 mm

- 2 layers84 × 60 mm

- 2 layers191.3 × 164 mm

XYmatics E64
XyrusB2010/XYmatics-E64
A 5-axis Klipper mainboard, powered by a Raspberry Pi Compute Module and STM32F407
282 parts
Questions
How big is the Daq griffin PCB?
It measures 120 × 120 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Daq griffin use?
223 parts, built around the TCAN3414D, TEENSY 4.1, TLV70933PKR and TPS54302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Daq griffin KiCad files?
From the cuspaceflight/white-giant-sensing-pcb repository on GitHub, at the commit this page was made from: the board is daq_griffin/daq_griffin.kicad_pcb and its schematic daq_griffin/ADCs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Daq griffin design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).