

TV B Gone ML v1 2
TV-B-Gone Design Files
- Size
- 50.2 × 31.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 15
- Pads
- 66
- Tracks, vias
- 211, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Oct 2015
- Updated
- 19 Mar 2025
Overview
TV B Gone ML v1 2 is an open-source printed circuit board by curiouselectric, from the curiouselectric/TVBGone repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.2 × 31.1 mm with 25 parts on 15 nets, routed with 211 tracks and 1 via.
It is built around the ATTINY85-15M, BC548 and BC640. Its parts include 6 connectors, 5 diodes, 5 transistors, 4 resistors and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATTINY85-15M
WQFN-20-EP(4x4)-40℃~+85℃ 16MHz 2.7V~5.5V 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH WQFN-20-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)BC548
TO-92TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)BC640
TO-92-55℃~+150℃ 1 PNP 100 100MHz 100nA 1A 500mV 5V 80V 830mW PNP TO-92 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdTV-B-Gone
This TV-B-Gone kit is a 'disruptive technology device' designed to switch off annoying and unnecessary televisions.
The TV-B-Gone was conceived by hack-hero Mitch Altman. It is designed emit the 'OFF' code for the majority of TVs in Europe and the US. Basically it is a TV remote control which only has the power button. It is designed to turn off inappropriate TVs, such as unwatched ones in public spaces. It is a commercial product, but Mitch has also worked with Adafruit industries to have an open-source design.
You can buy this as a kit of parts in the UK from the Curious Electric Company.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | BC548 | REInnovationFootprint:TO92-EBC_large_pad | Q2, Q3, Q4, Q5 |
| 4 | IR | REInnovationFootprint:LED-5MM_larg_pad | D1, D2, D3, D4 |
| 4 | PCB | REInnovationFootprint:NPTH_3MM | P4, P5, P6, P7 |
| 2 | 10k | REInnovationFootprint:TH_Resistor_1 | R2, R3 |
| 2 | 1k | REInnovationFootprint:TH_Resistor_1 | R1, R4 |
| 1 | 100nf | matts_components:C1_wide_lg_pad | C2 |
| 1 | 100uf | matts_components:C1V7_lg_pad | C1 |
| 1 | 8MHz | REInnovationFootprint:SIL-3_lg_pad | Y1 |
| 1 | ATTINY85 | REInnovationFootprint:DIP-8__300_ELL | IC1 |
| 1 | BATTERY | REInnovationFootprint:conn_2_battery | P1 |
| 1 | BC640 | REInnovationFootprint:TO92-ECB_large_pad_BC639 | Q1 |
| 1 | ISP | REInnovationFootprint:TH3x2_ISP | P2 |
| 1 | RED | REInnovationFootprint:LED-5MM_larg_pad | D5 |
| 1 | START | REInnovationFootprint:SW_PUSH_SMALL_lg_pad | SW1 |
More from curiouselectric/TVBGone
1- 2 layers54.9 × 33 mm

Similar boards
- 2 layers173 × 85 mm

Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL - 2 layers99.7 × 69.9 mm

- 2 layers146.3 × 41.1 mm

Bss500ap
KryptonPlusPlus/bss500-sheldon-reverse
Engenharia reversa do amplificador BSS500 da Sheldon
63 parts - 2 layers50.2 × 50.2 mm

- 2 layers50 × 50 mm

T85-with driver and poe
cnlohr/ethertiny
A firmware-only half-duplex 10Base-T implementation for AVRs
41 parts133 - 2 layers23 × 45 mm

- 2 layers41.1 × 110.7 mm

- 2 layers

Questions
How big is the TV B Gone ML v1 2 PCB?
It measures 50.2 × 31.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TV B Gone ML v1 2 use?
25 parts, built around the ATTINY85-15M, BC548 and BC640. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TV B Gone ML v1 2 KiCad files?
From the curiouselectric/TVBGone repository on GitHub, at the commit this page was made from: the board is TVBGone_Hardware/TVBGone_KiCAD/OLD/TV_B_Gone_ML_v1_2.kicad_pcb and its schematic TVBGone_Hardware/TVBGone_KiCAD/TV_B_Gone_ML_v1_3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TV B Gone ML v1 2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).