Skip to the content
2 layersSolarBauble v2 PCB, the printed circuit board in 3D

SolarBauble v2 PCB

curiouselectric/solarBauble

Solar powered flashing Christmas ornament design files and firmware. Based on ATTiny85

Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
15
Pads
60
Tracks, vias
195, 7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Oct 2026
Updated
5 Nov 2026

Overview

SolarBauble v2 PCB is an open-source printed circuit board by curiouselectric, from the curiouselectric/solarBauble repository on GitHub. It is a 2-layer board with 25 parts on 15 nets, routed with 195 tracks and 7 vias.

It is built around the ATTINY85-15M. Its parts include 9 diodes, 7 resistors, 3 capacitors, 3 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Solar Bauble

Solar powered flashing Christmas ornament design files and firmware. Based on ATTiny85

Files include:

  • PCB design files (KiCAD)
  • Instructions
  • Firmware (Arduino IDE)

Parts

25
QtyValueFootprintReferences
8LEDREInnovationFootprint:LED-5MM_larg_padD1, D2, D3, D4, D5, D6, D7, D8
41kREInnovationFootprint:R3-LARGE_PADS_0_8_holeR1, R2, R3, R4
20.47FREInnovationFootprint:C_0_47F_SuperCap_2POSC1, C2
210kREInnovationFootprint:R3-LARGE_PADS_0_8_holeR6, R7
1100kREInnovationFootprint:R3-LARGE_PADS_0_8_holeR5
1100nREInnovationFootprint:C1_wide_lg_pad_2C3
11N5819REInnovationFootprint:TH_Diode_1_reversedD9
12N3906Package_TO_SOT_THT:TO-92_InlineQ1
1ATTINY85REInnovationFootprint:DIP-8_300_ELLIC1
1HOLESREInnovationFootprint:PCB_solarbauble_pcb_outline_tree_4_5P4
1ISPREInnovationFootprint:ISP_3x2P2
1LOGO2CuriousElectric3:TCEC_Words_13mmP7
1SOLAR PVREInnovationFootprint:PV_53x30mm_AreaSC1

Similar boards

  • 2 layers50 × 50 mmT85-with driver and poe, the printed circuit board in 3D

    T85-with driver and poe

    cnlohr/ethertiny

    A firmware-only half-duplex 10Base-T implementation for AVRs

    41 parts133
  • 2 layers23 × 45 mmCell monitor, the printed circuit board in 3D

    Cell monitor

    scttnlsn/cell-monitor

    Battery cell monitor and balancer

    13 parts39MIT
  • 2 layers41.1 × 110.7 mmJNTUB, the printed circuit board in 3D

    JNTUB

    joyfulnoisesynth/JNTUB

    JoyfulNoise Tiny Utility Board

    84 parts26
  • 2 layersCastVolumeKnob, the printed circuit board in 3D

    CastVolumeKnob

    WebmasterTD/CastVolumeKnob

    Hardware Volume Knob for Google Cast devices

    18 parts25
  • 2 layers40 × 30 mmTest board, the printed circuit board in 3D

    Test board

    Guiimartinho/routeai

    LLM-Powered Electronic Design Automation Platform for PCB Design

    4 parts13
  • 2 layers78.3 × 78.5 mm50x70 tiny, the printed circuit board in 3D

    50x70 tiny

    rallekralle11/Tinyreflow

    Inspired by afterearthltd's reflow plate, but using fewer and simpler components.

    23 parts10
  • 2 layersMIDIMonkey, the printed circuit board in 3D

    MIDIMonkey

    aleh/MIDIMonkey

    Listens to MIDI messages on one pin and triggers drums on the others

    8 parts9MIT
  • 2 layers46.9 × 41.4 mmGR PW Noise, the printed circuit board in 3D

    GR PW Noise

    GadgetReboot/White_Pink_Noise

    White noise and pink noise PCB

    40 parts7

Questions

What parts does the SolarBauble v2 PCB use?

25 parts, built around the ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SolarBauble v2 PCB KiCad files?

From the curiouselectric/solarBauble repository on GitHub, at the commit this page was made from: the board is Solar Bauble - PCB/SolarBauble_v2 PCB.kicad_pcb and its schematic Solar Bauble - PCB/SolarBauble_v2 PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SolarBauble v2 PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask curiouselectric before reusing the design.