
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

Example of the kicad-display symbol repository being used to create a breakout board
LCD Touch is an open-source printed circuit board by Cuprum77, from the Cuprum77/kicad-display-breakout-example repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 33.5 × 47.8 mm with 10 parts on 15 nets, routed with 146 tracks and 14 vias.
It is built around the BC817. Its parts include 3 capacitors, 3 resistors, 1 transistor and 1 connector. It belongs with the lEDs and displays and interfaces and adapters boards of this library.
This repository contains a simple breakout board for a 1.69" IPS LCD with capacitive touch, and serves as an example of the KiCad project structure.
It was intended to be used with the following display from AliExpress, however this flat-flex cable is not solderable, and requires a FPC connector to be soldered onto the PCB. This was originally an oversight on my part, and the PCB that was produced did not feature this footprint, which required manual rework of soldering individual wires directly to the FPC. This version should be fixed, although it has never been produced.
Remember to pull recursive submodules to include the display library if you are using git to clone the repository!
git submodule update --init --recursive| Reference | Value | Quantity | Source |
|---|---|---|---|
| DS1 | 1.69" IPS LCD with capacitive touch, FPC connector with 0.5mm pitch | 1 | Digikey |
| C1, C2, C3 | 100 nF 0603 | 3 | Digikey |
| R1 | 1k 0603 | 1 | Digikey |
| R2 | 10k 0603 | 1 | Digikey |
| R3 | 0R 06031 | 1 | Digikey |
| J1 | 1x12 2.54mm Header | 1 | Digikey |
I am in no way affiliated with any of the companies mentioned in this document. The links to the products are provided for convenience and are not endorsements of any kind. The products may be available from other sources, and I encourage you to shop around for the best price and availability.
The PCB however were paid for by Aisler as a part of a single-time sponsorship through a store-credit. I am under no contract or obligation to promote their services, and I have no financial interest in their success.
This project is licensed under CERN Open Hardware License Version 2 - Strong Reciprocity (CERN-OHL-S-2.0). See LICENSE for more details.
Note that R3 can be shorted by a solder bridge if you don't have a 0R resistor. This is an optional resistor to limit the current to the LCD backlight. The backlight consists of 3 LEDs in parallel and can pull up to 60 mA. With a 3V3 supply and a BJT as a switch, the voltage over the LED will be slightly below the nominal forward voltage of 3 V. ↩
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1.69" Touch LCD | SFV18R_4STBE1HLF:AMPHENOL_SFV18R-4STBE1HLF | DS1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | LOGO | LOGO | G*** |

W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino


BitDogLab/BitDogLab
Open-source educational hardware for embedded systems, programming, electronics, and physical computing.



It measures 33.5 × 47.8 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Cuprum77/kicad-display-breakout-example repository on GitHub, at the commit this page was made from: the board is LCD_Touch.kicad_pcb and its schematic LCD_Touch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).