2 layers142.6 × 85.1 mm
LineFollower Speedy-
Club-robotica-UDLSB/LineFollower-Speedy-
Documentación del desarrollo del Seguidor de línea (El speedy)
89 partsGPL-3.0
2 layers63.1 × 35.3 mm
Pcb stm32
ctron/drogue-device-thermometer- Size
- 63.1 × 35.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 15
- Pads
- 60
- Tracks, vias
- 75, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Jun 2021
- Updated
- 27 Sep 2021
Overview
Pcb stm32 is an open-source printed circuit board by ctron, from the ctron/drogue-device-thermometer repository on GitHub. It is a 2-layer board of 63.1 × 35.3 mm with 12 parts on 15 nets, routed with 75 tracks and 1 via.
It is built around the ESP-01S. Its parts include 4 connectors, 2 capacitors, 2 resistors and 1 switch. It belongs with the ESP8266, STM32 and AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | Battery | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | DISP_PORT | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | ESP-01S | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J3 |
| 1 | PRESET | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | PROBE | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | SW_SPST | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW1 |
Questions
How big is the Pcb stm32 PCB?
It measures 63.1 × 35.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb stm32 use?
12 parts, built around the ESP-01S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb stm32 KiCad files?
From the ctron/drogue-device-thermometer repository on GitHub, at the commit this page was made from: the board is kicad/pcb_stm32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb stm32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ctron before reusing the design.
Similar boards
- 2 layers36 × 17 mm
TasmotaLED
Ennar1991/TasmotaLED
Simple 12V LED strip driver based on ESP-01S board running Tasmota
15 parts - 2 layers80 × 80 mm
- 2 layers
DFC77 ESP01
kev-m/DFC77
A personal project to generate a local DCF77-compatible signal for nearby radio-controlled clocks.
19 parts - 2 layers80 × 40 mm
Diesel heater black pill
peakhunt/chinese-diesel-heater-black-pill
stm32f4 based chinese diesel heater
32 partsMIT - 2 layers74.9 × 58.4 mm
- 2 layers200 × 90 mm
- 2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT