
Phils Lab #165
ctrl-z3d/pcb-designs
A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes.

A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes.
Phils Lab #65 is an open-source printed circuit board by ctrl-z3d, from the ctrl-z3d/pcb-designs repository on GitHub. It is a 2-layer board of 42 × 43.7 mm with 32 parts on 50 nets, routed with 169 tracks and 31 vias.
It is built around the AMS1117-3.3. Its parts include 13 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the STM32 boards of this library.
A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes. This repo is mostly a learning log and reference for myself, but feel free to poke around if you found it useful.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10nF | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9, C10, C11 |
| 4 | 1k5 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R3, R5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | Conn_01x04_Pin | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C12, C13 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
| 1 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 10pF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | STM32F103C_8-B_T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521_CircularHoles | J4 |

ctrl-z3d/pcb-designs
A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes.

ctrl-z3d/pcb-designs
A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes.


pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io


MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver



shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
It measures 42 × 43.7 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ctrl-z3d/pcb-designs repository on GitHub, at the commit this page was made from: the board is Phils Lab #65/Phils Lab #65.kicad_pcb and its schematic Phils Lab #165/Phils Lab #165.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ctrl-z3d before reusing the design.