Skip to the content
2 layers65 × 56 mmLCD Tester, the printed circuit board in 3D

LCD Tester

cscott/rain-barrel
Full screenGitHub.kicad_pcb
Size
65 × 56 mm
Copper layers
2
Thickness
1 mm
Parts
53
Nets
75
Pads
260
Tracks, vias
947, 83
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Aug 2021
Updated
25 May 2026

Overview

LCD Tester is an open-source printed circuit board by cscott, from the cscott/rain-barrel repository on GitHub. It is a 2-layer board of 65 × 56 mm with 53 parts on 75 nets, routed with 947 tracks and 83 vias.

It is built around the M2.5. Its parts include 12 capacitors, 5 connectors and 3 resistors. It belongs with the lEDs and displays boards of this library.

Main components

1

Parts

53
QtyValueFootprintReferences
121uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12
4M2.5MountingHole:MountingHole_2.7mm_M2.5MK1, MK2, MK3, MK4
115Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR3
11MResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR2
1200Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_VerticalR1
15xJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP21
16xJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP22
17xJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP20
1A0/8LCD-Tester:Jumper-THT-NCJP14
1Conn_01x36_MaleConnector_PinHeader_2.00mm:PinHeader_2x20_P2.00mm_VerticalJ4
1Conn_01x36_MaleConnector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_VerticalJ3
1Conn_02x20_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalP1
1D0/0LCD-Tester:Jumper-THT-NCJP8
1D1/1LCD-Tester:Jumper-THT-NCJP16
1D2/2LCD-Tester:Jumper-THT-NCJP1
1D3/3LCD-Tester:Jumper-THT-NCJP2
1D4/4LCD-Tester:Jumper-THT-NCJP3
1D5/5LCD-Tester:Jumper-THT-NCJP9
1D6/6LCD-Tester:Jumper-THT-NCJP10
1D7/7LCD-Tester:Jumper-THT-NCJP15
1DISPLAYTECH-128240DTransflective:F314-1A7H1-11036DS1
1IF1/12LCD-Tester:Jumper-THT-NCJP17
1IF2/13LCD-Tester:Jumper-THT-NCJP11
1IF3/14LCD-Tester:Jumper-THT-NCJP12
1LCD BacklightConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2
1LCD VOLTAGESConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ1
1LCD_C1NLCD-Tester:Jumper-THT-NCJP25
1LCD_C2NLCD-Tester:Jumper-THT-NCJP26
1LCD_C7PLCD-Tester:Jumper-THT-NCJP24
1LCD_V0INLCD-Tester:Jumper-THT-NCJP23
1LCD_VDDLCD-Tester:Jumper-THT-NCJP27
1LCD_VSSLCD-Tester:Jumper-THT-NCJP28
1RD/9LCD-Tester:Jumper-THT-NCJP6
1RST/11LCD-Tester:Jumper-THT-NCJP7
1SCL/16LCD-Tester:Jumper-THT-NCJP18
1SI/15LCD-Tester:Jumper-THT-NCJP13
1VLCD LIMITJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mmJP19
1WR/10LCD-Tester:Jumper-THT-NCJP5
1XCS/17LCD-Tester:Jumper-THT-NCJP4

More from cscott/rain-barrel

7
  • 2 layers162 × 116 mmLCD panel, the printed circuit board in 3D

    LCD panel

    cscott/rain-barrel

    46 parts
  • 2 layers80.5 × 29.2 mmSnitch-2, the printed circuit board in 3D

    Snitch-2

    cscott/rain-barrel

    35 parts
  • 2 layers25.5 × 30.5 mmLCD Fixup, the printed circuit board in 3D

    LCD Fixup

    cscott/rain-barrel

    19 parts
  • 2 layers80.9 × 22.7 mmLevel Chopper, the printed circuit board in 3D

    Level Chopper

    cscott/rain-barrel

    19 parts
  • 2 layers80.3 × 19.1 mmLevel Amp PCB, the printed circuit board in 3D

    Level Amp PCB

    cscott/rain-barrel

    13 parts
  • 2 layers47 × 47 mmTurbine PCB, the printed circuit board in 3D

    Turbine PCB

    cscott/rain-barrel

    11 parts

Similar boards

  • 2 layers40.9 × 85 mmStudio mic, the printed circuit board in 3D

    Studio mic

    Spirit532/studio_mic

    A simple, easy to build preamplifier for any true condenser capsule, to make a condenser microphone

    63 parts150MIT
  • 2 layers65 × 56 mmPi1541io, the printed circuit board in 3D

    Pi1541io

    hackup/Pi1541io

    Raspberry Pi extension board for the PI1541 project.

    57 parts109CC-BY-SA-4.0
  • 2 layers65 × 56 mmClumsyMIDI, the printed circuit board in 3D

    ClumsyMIDI

    gmcn42/clumsyMIDI

    A THT-only Raspberry Pi expansion board containing a MIDI interface, DAC, and OLED display

    26 parts90CC-BY-SA-4.0
  • 6 layers203 × 151.8 mmPDNode Baseboard, the printed circuit board in 3D

    PDNode Baseboard

    DvidMakesThings/HW_PDNode-600-Pro

    The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.

    236 parts86AGPL-3.0
  • 4 layers60 × 127 mmOpenHT RF, the printed circuit board in 3D

    OpenHT RF

    M17-Project/OpenHT-hw

    Repository for the hardware parts of the OpenHT project

    199 parts63
  • 2 layers85 × 56.5 mmModemHAT, the printed circuit board in 3D

    ModemHAT

    astuder/ModemHAT

    Classic Phone Modem HAT for the Raspberry Pi

    111 parts56
  • 4 layers70 × 60 mmMarelleo, the printed circuit board in 3D

    Marelleo

    Zebra-Rodeo/marelleo

    Une boîte qui raconte une histoire quand on pose une figurine dessus. Boîtier, carte, micrologiciel et doc pour la refaire.

    57 parts47
  • 2 layers285.8 × 124.6 mmPunk75, the printed circuit board in 3D

    Punk75

    dsanchezseco/punk75

    Ortholinear keyboard with 75 keys and all components through hole

    194 parts44GPL-3.0

Questions

How big is the LCD Tester PCB?

It measures 65 × 56 mm and has 2 copper layers, 1 mm thick.

What parts does the LCD Tester use?

53 parts, built around the M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LCD Tester KiCad files?

From the cscott/rain-barrel repository on GitHub, at the commit this page was made from: the board is Transflective/LCD-Tester/LCD-Tester.kicad_pcb and its schematic Transflective/Level-Amp-PCB/Level-Amp-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LCD Tester design in my own project?

Its repository states no licence, so its author keeps all rights: ask cscott before reusing the design.