Skip to the content
2 layers39.4 × 43 mmBetula Input, the printed circuit board in 3D

Blattwerk Eurorack modules. Designed by Lorenz Neumann

Size
39.4 × 43 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
55
Pads
222
Tracks, vias
804, 102
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
6 Feb 2021
Updated
6 Mar 2025

Overview

Betula Input is an open-source printed circuit board by Cs4System, from the Cs4System/Eurorack repository on GitHub. It is a 2-layer board of 39.4 × 43 mm with 69 parts on 55 nets, routed with 804 tracks and 102 vias.

It is built around the LM324. Its parts include 28 resistors, 18 capacitors, 9 connectors, 8 diodes and 6 ICs. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Eurorack

  • All files are published under CC BY-NC-SA 4.0 if not marked differently

  • DO NOT USE COMMERCIALLY!

  • Build for yourself or for a friend, but do not sell builds, PCBs, pannels or any parts of the designes in this repository!

  • Feel free to modify, copy and use all files provided here. If you want to publish derivative work, please do so under same license as original

  • Any feedback and collaboration is very welcome!

  • Please feel free to open an issue on the issues tab

Have you built a module and would like to say thank you? https://paypal.me/LorenzNeumann

Blattwerk - Betula

  • 8 channels In/Out ADAT Interface
  • Outputs are DC coupled
  • Inputs can be switched with jumpers between AC and DC coupling (In 2 groups: channel 1-4 and channel 5-8)
  • Low noise: -110dB
  • Low THD: >0.01% @ 1kHz, -6dB(+-5Vpp)
  • 22kOhm input-impedance, 1kOhm output-impedance
  • 8HP
  • All channels with bicolored indicator LED
  • ADAT sync indicator LED
  • No μController, no programming required, hardware only
  • CC BY-NC-SA 4.0 DO NOT USE COMMERCIALY!
  • small and dense SMD build (0603,TSSOP)
  • 180mA @ +12V and 100mA @ -12V (Without connected ADTA-signal: 14mA @ +12V and 0mA @ -12V)

Blattwerk - Salix

  • VCF based on the Moog Transistor Ladder Filter
  • Compensation for loss of bass in high resonance settings via potentiometer
  • 6,12,18,24 dB/Oct selectable via potentiometer or CV!
  • 2 Inputs with attenuator for audio and CV
  • Seperate V/Oct input.
  • Input-Drive indicator LED
  • 8HP
  • small and dense SMD build (0603, SOIC, SOT-363!) Not a beginner build, please be sure to have some SMD-soldering practice!
  • 45mA @ +12V and 25mA @ -12V
  • quick demo: https://youtu.be/XMdGtwIK5IQ

Transistor Ladder VCF

  • Deprecated version of Salix VCF
  • VCF based on the Moog Transistor Ladder Filter
  • Compensation for loss of bass in high resonance settings via potentiometer
  • 6,12,18,24 dB/Oct selectable via potentiometer or CV!
  • 2 Inputs with attenuator for audio and CV
  • Seperate V/Oct input.
  • Input-Drive indicator LED
  • 8HP
  • CC BY-NC-SA 4.0
  • small and dense SMD build (0603, SOIC, SOT-363!)
  • 45mA @ +12V and 25mA @ -12V
  • PCB and Panel is available at synthCube
  • Quick demo: https://youtu.be/XMdGtwIK5IQ

Dual Ears

  • BETA!
  • Modification of Mutable Instruments Ears
  • 2 seperat channels of original design, no internal contact microphone
  • no jumpers, fixed values for fast Envelope Follower and Gate-Threshold of 1V
  • 4HP
  • CC-BY-SA 3.0, Orginal schematics by Emilie Gillet
  • small and dense SMD build (0603, TSSOP)

Parts

69
QtyValueFootprintReferences
8100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5, C6, C7, C8, C13, C14, C15, C16
822kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R6, R7, R8, R17, R18, R19, R20
8330RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2, R3, R4, R13, R14, R15, R16
83k3Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9, R10, R11, R12, R21, R22, R23, R24
8560pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C9, C10, C11, C12
8AudioJack2_SwitchTEigenes:ThonkiconJ1, J2, J3, J4, J5, J6, J7, J8
8LED_Dual_BidirectionalLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6, D7, D8
447RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR25, R26, R27, R28
4OPA1692xDPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U2, U5, U6
222uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC17, C18
2LM324Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU3, U4
1Conn_02x15_Top_BottomEigenes:analogIN-MainJ9

More from Cs4System/Eurorack

5
  • 4 layers39.4 × 110.3 mmBetula Main, the printed circuit board in 3D

    Betula Main

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    176 parts83
  • 2 layers39.7 × 109.8 mmSalix VCF, the printed circuit board in 3D

    Salix VCF

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    126 parts83
  • 2 layers20 × 110 mmDual ears, the printed circuit board in 3D

    Dual ears

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    125 parts83
  • 2 layers39.4 × 43.2 mmBetula Output, the printed circuit board in 3D

    Betula Output

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    77 parts83
  • 2 layers39.5 × 12.8 mmBetula ADAT, the printed circuit board in 3D

    Betula ADAT

    Cs4System/Eurorack

    Blattwerk Eurorack modules. Designed by Lorenz Neumann

    6 parts83

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers36.8 × 34.7 mmTinylab proto1, the printed circuit board in 3D

    Tinylab proto1

    espotek-org/Labrador

    EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

    79 parts1.2k
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers231.1 × 106.7 mmSnark barker, the printed circuit board in 3D

    Snark barker

    schlae/snark-barker

    A 100% compatible replica of the famed SB 1.0 sound card

    199 parts687
  • 4 layers82.6 × 82.6 mmJumperlessV5r8, the printed circuit board in 3D

    JumperlessV5r8

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    650 parts332
  • 4 layers72.4 × 95.3 mmDingoPDM, the printed circuit board in 3D

    DingoPDM

    corygrant/dingoPDM

    Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

    156 parts128MIT
  • 2 layers191.5 × 76 mmPcb project, the printed circuit board in 3D

    Pcb project

    CrashOverride85/zc95

    4 channel EStim box inspired by the mk312bt, with Lua scripting support

    337 parts117GPL-3.0
  • 4 layers292.1 × 88.3 mmSnark barker mca, the printed circuit board in 3D

    Snark barker mca

    schlae/snark-barker-mca

    A Sound Blaster compatible sound card for Micro Channel bus computers

    177 parts69

Questions

How big is the Betula Input PCB?

It measures 39.4 × 43 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Betula Input use?

69 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Betula Input KiCad files?

From the Cs4System/Eurorack repository on GitHub, at the commit this page was made from: the board is Betula/Betula_Input/Betula_Input.kicad_pcb and its schematic Betula/Betula_ADAT/Betula_ADAT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Betula Input design in my own project?

Its repository states no licence, so its author keeps all rights: ask Cs4System before reusing the design.