2 layers96.6 × 82.8 mm
2 layers85.6 × 98.8 mm
Starbie
Cryptoblade9623/StarbieMotion and button controlled pet with an OLED display, humidity and temperature sensor and motion sensor.
- Size
- 85.6 × 98.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 25
- Pads
- 54
- Tracks, vias
- 51, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Oct 2026
- Updated
- 27 Oct 2026
Overview
Starbie is an open-source printed circuit board by Cryptoblade9623, from the Cryptoblade9623/Starbie repository on GitHub. It is a 2-layer board of 85.6 × 98.8 mm with 21 parts on 25 nets, routed with 51 tracks and 12 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the lEDs and displays boards and the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdStarbie
Motion and button controlled pet with an OLED display, humidity and temperature sensor and motion sensor. It is controlled by an ESP32 C3 Supermini. This is a guide, by SharKing Studios from Half-Life. The files include the KiCad files, gerbers, drill files, firmware - which you will have to put into a folder of the same name and then open in the Arduino IDE, footprints for the custom silkscreen, non - KiCad symbols and footprints for the screen, ESP32, and DHT11, and my personal sprite creation. I have not included the swicthes and keycaps because I have 4 switches and quite a few keycaps from previous projects.
Instructions
- Solder the 10K ohm resistor onto the top left corner of the board.
- Solder the MPU6050 onto the middle area of the board with pinheaders.
- Solder the mechanical switches into their corners on the PCB.
- Solder on the OLED display in the middle of the board, above the MPU6050.
- Solder the DHT11 in between the resistor and the OLED.
- Finally solder the ESP32 onto the right side of the board so that the USBC port just hangs off the egde.
- You can also add some small stickers onto the tips of the corners or on the back if you have them, but this is completely optional. And you're done!
BOM
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LOGO | Starbie:Shooting Star | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** |
| 2 | LOGO | Starbie:Half Life Logo | G***, G*** |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW3, SW4 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U4 |
| 1 | MPU6050 | Imported Parts:MPU6050_Module | J4 |
| 1 | OLED | Imported Parts:Display_128x64_096_I2C | J3 |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C3-SMD | U3 |
Questions
How big is the Starbie PCB?
It measures 85.6 × 98.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starbie use?
21 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starbie KiCad files?
From the Cryptoblade9623/Starbie repository on GitHub, at the commit this page was made from: the board is Files/KiCad/Starbie.kicad_pcb and its schematic Files/KiCad/Starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starbie design in my own project?
Its repository states no licence, so its author keeps all rights: ask Cryptoblade9623 before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5