

CommBoard
Projects with Kicad
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 66
- Nets
- 140
- Pads
- 460
- Tracks, vias
- 555, 320
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 31 Aug 2022
- Updated
- 27 Aug 2026
Overview
CommBoard is an open-source printed circuit board by cristobalcuevas, from the cristobalcuevas/PCB-Designs repository on GitHub. It is a 4-layer board of 100 × 100 mm with 66 parts on 140 nets, routed with 555 tracks and 320 vias.
It is built around the 74LVC2G126DC, FT230XS-R and SIP32509DT, with the MIC29302WU and ESDA6V1-5SC6 among its other parts. Its parts include 26 capacitors, 15 resistors, 12 ICs, 9 connectors and 1 diode. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
574LVC2G126DC
VSSOP-8-0.5mm-40℃~+125℃ 1 1.65V~5.5V 1.9ns@4.5V,50pF 2 32mA 32mA 4uA 74LVC Schmitt trigger Tri-State Unidirectional VSSOP-8-0.5mm Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, TransceiversFT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB ConvertersSIP32509DT
TSOT-23-6-40℃~+125℃ 1.1V~5.5V 3A 47mΩ High Side Switch TSOT-23-6 Power Distribution Switches ROHSVishay IntertechnologyAC-DC Controllers And RegulatorsMIC29302WU
TO-263-5-40℃~+125℃@(Tj) 1 26V 370mV@(3A) 37mA 3A 400uVrms、260uVrms Adjustable Over Current Protection、Over Temperature Protection、Reverse connection protection、Enable Positive TO-263-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsESDA6V1-5SC6
SOT-23-6100nA 10A@8/20us 11V、14V 140W@8/20us 5V 60pF 9V ESD IEC 61000-4-2、IEC 61000-4-4 SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdParts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C6, C10, C11, C13, C17, C22, C23, C28, C75 |
| 6 | 20k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 5 | 33p | Capacitor_SMD:C_0805_2012Metric | C24, C25, C26, C27, C29 |
| 3 | 22R | Resistor_SMD:R_0805_2012Metric | R18, R19, R20 |
| 3 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C3, C4, C8 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C15, C16 |
| 2 | 22u | Capacitor_SMD:CP_Elec_6.3x5.7 | C18, C21 |
| 2 | 27R | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 47p | Capacitor_SMD:C_0805_2012Metric | C7, C9 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R9, R10 |
| 2 | 74LVC2G126 | Package_SO:VSSOP-8_2.4x2.1mm_P0.5mm | U1, U7 |
| 2 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2 |
| 2 | SW | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J3, J6 |
| 2 | SiP32509 | Package_TO_SOT_SMD:TSOT-23-6 | U3, U4 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 2k4 | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 600 Ohms@100MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | EN_3V3 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | EN_5V | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J5 |
| 1 | ESDA6V1-5SC6 | Package_TO_SOT_SMD:SOT-23-6 | D2 |
| 1 | Enable | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J7 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U5 |
| 1 | GSM | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J12 |
| 1 | Latch_GSM | CommBoard:MM60-EZH039-B5-R850 | U9 |
| 1 | Latch_LoRa | CommBoard:MM60-EZH039-B5-R850 | U10 |
| 1 | Latch_SWAM | CommBoard:MM60-EZH039-B5-R850 | U2 |
| 1 | MIC29302WU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U6 |
| 1 | Mini_PCIe_GSM | CommBoard:MM60-52B1-B1-R850 | U11 |
| 1 | Mini_PCIe_LoRa | CommBoard:MM60-52B1-B1-R850 | U12 |
| 1 | Mini_PCIe_SWARM | CommBoard:MM60-52B1-B1-R850 | U8 |
| 1 | PCI_Express_X4 | Connector_PCBEdge:BUS_PCIexpress_x4 | J1 |
| 1 | SIM_Card_Shield | CommBoard:5039600696 | J11 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
More from cristobalcuevas/PCB-Designs
12- 4 layers100 × 100 mm

- 4 layers60 × 75 mm

- 4 layers67.8 × 83.3 mm

- 4 layers100 × 100 mm

- 4 layers51 × 30 mm

- 2 layers50 × 50 mm

- 4 layers100 × 100 mm

- 2 layers68.6 × 53.3 mm

- 2 layers100 × 70 mm

- 2 layers108 × 48.3 mm

- 2 layers42.7 × 34.5 mm

- 4 layers50.9 × 30 mm

Similar boards
- 2 layers40 × 70 mm

KinetiCoreDC
axpaul/KinetiCoreDC
Compact STM32G0-based DC motor controller board featuring TI DRV8874 H-bridge drivers, RS485 communication, optoisolated I/O, and hardware power protection.
183 parts1CERN-OHL-S-2.0 - 2 layers37.5 × 50.8 mm

- 2 layers90 × 90 mm

- 2 layers85.6 × 88.9 mm

OM Landroid MB
rich21044/Openmower-for-Landroid-WR141E
Taking the hardware developed as part of ClemensElfleins work on Openmower and adapting it to fit a 2019 Landroid WR141E.
126 parts8GPL-3.0 - 2 layers29 × 27 mm

USB C-3-way splitter
bluepylons/USB-C-3-way-splitter
A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources
37 parts40MIT - 2 layers180 × 170 mm

- 2 layers60 × 70 mm

MC60
wyolum/MC60
break out board for Quectel MC60 Ultra-small LCC Quad-band GSM/GPRS/GNSS Module
109 parts17 - 2 layers118.5 × 94.5 mm

WaveLab24GHz
PA0MHE/Wavelab-24G-Addon-module
Can be used as addon module for the Wavelab 23X1008XP module, which was available during the 2021-2022 timeframe on www.ebay.pl seller:bisonelectronics-sp2jyr The module converts the first-IF 2364MHz to 432MHz (or…
207 parts5MIT
Questions
How big is the CommBoard PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.61 mm thick.
What parts does the CommBoard use?
66 parts, built around the 74LVC2G126DC, FT230XS-R, SIP32509DT and MIC29302WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CommBoard KiCad files?
From the cristobalcuevas/PCB-Designs repository on GitHub, at the commit this page was made from: the board is HornSystem/CommBoard/CommBoard/CommBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CommBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask cristobalcuevas before reusing the design.
