4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers114 × 85 mm
Clog v2
crestofthebeast/thong4i would go to clog v2 if THIS was the inner index. this was teh pinky
- Size
- 114 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 36
- Pads
- 402
- Tracks, vias
- 410, 52
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Apr 2023
- Updated
- 29 Apr 2023
Overview
Clog v2 is an open-source printed circuit board by crestofthebeast, from the crestofthebeast/thong repository on GitHub. It is a 2-layer board of 114 × 85 mm with 51 parts on 36 nets, routed with 410 tracks and 52 vias.
It is built around the 1N4148W. Its parts include 19 switches, 16 diodes and 2 ICs. It belongs with the nRF52 and nRF5x boards of this library.
Main components
1Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1N4148W | footprints:smd-diode | D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D16, D17, D18 |
| 15 | Switch | pg1350:pg1350-DH | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW17, SW18 |
| 4 | Val** | footprints:m2-hole | Ref**, Ref**, Ref**, Ref** |
| 3 | MountingHole_Pad | footprints:single-pin | -1, +1, PW1 |
| 2 | EVQWGD001 | footprints:evq | SW16_1, SW16_2 |
| 2 | LOGO | art:smores | G***, G*** |
| 2 | LOGO | art:clogs | G***, G*** |
| 2 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW20, SW21 |
| 2 | xiao-ble | footprints:xiao-ble | U1, U2 |
| 1 | Val** | footprints:catra_half | Ref** |
| 1 | Val** | footprints:adora_half | Ref** |
The 50 most common of 51 parts.
Questions
How big is the Clog v2 PCB?
It measures 114 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clog v2 use?
51 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clog v2 KiCad files?
From the crestofthebeast/thong repository on GitHub, at the commit this page was made from: the board is clog-v2.kicad_pcb and its schematic clog-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clog v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask crestofthebeast before reusing the design.
Similar boards
- 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 2 layers285.5 × 95 mm
- 4 layers95.6 × 73.6 mm
- 2 layers141.5 × 83 mm
Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT - 6 layers160 × 100 mm
- 2 layers99.1 × 90.7 mm
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…
108 parts108 - 2 layers229.8 × 102.6 mm
