Skip to the content
2 layersSiguelineas, the printed circuit board in 3D

Line following robot based on a PID algorithm. Draws the line itinerary in an Android device thanks to the wheels encoders.

Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
19
Pads
75
Tracks, vias
124, 6
Pours
1
Routed
Yes
KiCad
KiCad 3
Created
18 Nov 2014
Updated
29 Nov 2014

Overview

Siguelineas is an open-source printed circuit board by crespum, from the crespum/Line-following-PID-robot repository on GitHub. It is a 2-layer board with 4 parts on 19 nets, routed with 124 tracks and 6 vias.

It is built around the L293D. Its parts include 2 ICs and 2 connectors. It belongs with the robots and motor control boards of this library.

Main components

1

README

README.md

Line following robot

This robot was developed for the OSHWDem 2014 by Mateo Ramos and Xabi Crespo. It has two functionalities:

  • Obviously, it completes a circuit following a black line based on a PID algorithm.
  • It connects to an Android app through bluetooth and sends data about the wheels speed so that the Android phone can draw the circuit.

Repository structure

This project is divided into three main folders:

  • Electronics: contains the design of all the PCBs including wheels encoders, infrared sensors and one last board which contains the motor drivers, headers for the Bluetooth board and headers for a Arduino mini pro.
  • Android/BluetoothManager: contains the Android app in charge of communicating with the robot and print the circuit.
  • Arduino/robot: contains the Arduino sketch

alt text

Parts

4
QtyValueFootprintReferences
1ARDUINO-DEEK-ROBOTArduino-Deek-RobotU1
1CONN_10X2pin_array_10x2P1
1CONN_4PIN_ARRAY_4x1P2
1L293DDIP-16__300IC1

Similar boards

  • 2 layers178 × 145 mmUltra DB X51 v1, the printed circuit board in 3D

    Ultra DB X51 v1

    ExploreEmbedded/8051_DevelopmentBoard

    Design files and sample code for 8051 development Ultra Boards

    145 parts70
  • 2 layers84.3 × 58.4 mmEnocderDriver, the printed circuit board in 3D

    EnocderDriver

    NikodemBartnik/Small-Projects

    All of smaller projects (Arduino, PCBs, electronics, code)

    35 parts55
  • 2 layers56.4 × 72.6 mmRas pi hat, the printed circuit board in 3D

    Ras pi hat

    geno543/Redropi_highway

    the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…

    8 parts13
  • 2 layers87.5 × 70 mmLaberinto, the printed circuit board in 3D

    Laberinto

    CRM-UAM/CRMaze

    Open source robot for maze solving + line following

    34 parts12
  • 2 layers92.5 × 62.5 mmDropGenPCB, the printed circuit board in 3D

    DropGenPCB

    harrislab-brown/DropGen

    DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.

    25 parts12CC-BY-SA-4.0
  • 2 layers47.5 × 49.5 mmElectronic, the printed circuit board in 3D

    Electronic

    zosko/magspoof

    Magspoof with Arduino Pro Micro

    5 parts11
  • 2 layers120.7 × 184.1 mmBeachRover circuit, the printed circuit board in 3D

    BeachRover circuit

    wizardofrobots/roverCode

    Jetson Nano powered Arduino Rover

    11 parts10
  • 2 layers90 × 53.4 mmOpenOx, the printed circuit board in 3D

    OpenOx

    hacklabkyiv/openox-pcb

    PCB design for OpenOx - open source oxygen concentrator

    43 parts7GPL-3.0

Questions

What parts does the Siguelineas use?

4 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Siguelineas KiCad files?

From the crespum/Line-following-PID-robot repository on GitHub, at the commit this page was made from: the board is Electronics/Motors driver/siguelineas.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Siguelineas design in my own project?

Its repository states no licence, so its author keeps all rights: ask crespum before reusing the design.