

Mp6612
- Size
- 36.9 × 34 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 18
- Pads
- 89
- Tracks, vias
- 192, 39
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Mar 2022
- Updated
- 16 Oct 2026
Overview
Mp6612 is an open-source printed circuit board by cpeniche, from the cpeniche/hardware repository on GitHub. It is a 4-layer board of 36.9 × 34 mm with 32 parts on 18 nets, routed with 192 tracks and 39 vias.
It is built around the MP6612DGF-P, B340A and OQ0212500000G, with the TB002-500-02BE among its other parts. Its parts include 13 capacitors, 6 diodes, 5 resistors, 3 connectors and 1 IC.
Main components
4MP6612DGF-P
-UncategorisedMonolithic Power SystemsB340A
SMA(DO-214AC)-55℃~+150℃ 1 Independent 3A 40V 500mV@3A 500uA@40V 80A SMA(DO-214AC) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesOQ0212500000G
插件,P=3.5mm-40℃~+115℃ 1 10A 1x2P 2 2P 3.5mm 300V Board Side/Socket - Closed Green Through Hole 插件,P=3.5mm Pluggable System Terminal Block ROHSAmphenolPluggable System Terminal BlockTB002-500-02BE
插件插件 Screw Terminal Blocks ROHSCUIScrew Terminal Blocks
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C10, C11, C12 |
| 5 | B340A | Diode_SMD:D_SMA | D1, D2, D3, D4, D5 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7 |
| 3 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
| 3 | Jumper_2_Bridged | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1, JP2, JP3 |
| 2 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5 |
| 1 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_HandSolder | C8 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D6 |
| 1 | MP6612DGF-P | User_Footprint:TSSOP-20EP_MP6612D_MNP | U1 |
| 1 | OQ0212500000G | User_Footprint:OQ0212500000G | J2 |
| 1 | TB002-500-02BE | User_Footprint:CUI_TB002-500-02BE | J3 |
More from cpeniche/hardware
12- 4 layers22 × 22 mm

- 4 layers100.6 × 67.1 mm

- 4 layers103 × 80.1 mm

- 4 layers54 × 52.7 mm

- 4 layers72.8 × 53.3 mm

- 2 layers68 × 56 mm

- 4 layers33.8 × 34.4 mm

- 4 layers30 × 26.8 mm

- 4 layers30 × 26.8 mm

- 2 layers36 × 38.9 mm

- 2 layers28.7 × 29.8 mm

- 2 layers45.3 × 38.8 mm

Similar boards
- 2 layers174 × 97.8 mm

- 4 layers77.1 × 39.9 mm

LEL Detector
citrineio/LEL-Detector
This project takes inspiration from my current job as a control and instrumentation engineer in the oil and gas industry.
77 parts11 - 6 layers62 × 77 mm

Black Body Temperature Sensor PCB
DylanLockyer/Black_Body
Electrical system for black body MKID tester
217 parts1MIT - 4 layers50 × 75 mm

OneroiV1
HomeOnDuna/Nyx-Flight-Computers
Contains the Nyx flight computer family developed for UNSW Rocketry Avionics team.
166 parts1 - 2 layers174.2 × 124 mm

- 2 layers31.6 × 33.5 mm

AC to DC Converter Circuit
LordEbisu/AC-to-DC-Converter-Circuit
Simple AC to DC converter using bridge rectifier and capacitors.
12 parts1 - 2 layers69.6 × 51.3 mm

- 2 layers33.5 × 37 mm

SumpPump
aidanogr/SumpPumpActivityMonitorPCB
Transforms 7.7Vrms transformed signal from sump pump and converts it to 3VAC to be read by GPIO
9 partsGPL-3.0
Questions
How big is the Mp6612 PCB?
It measures 36.9 × 34 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mp6612 use?
32 parts, built around the MP6612DGF-P, B340A, OQ0212500000G and TB002-500-02BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mp6612 KiCad files?
From the cpeniche/hardware repository on GitHub, at the commit this page was made from: the board is Motor/mp6612/mp6612.kicad_pcb and its schematic AVR/cnc_arduino_hat/A4983 Motor Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mp6612 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cpeniche before reusing the design.