

Project2
Data Acquisition & Embedded Systems
- Size
- 102.9 × 59.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 37
- Pads
- 90
- Tracks, vias
- 134, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Aug 2015
- Updated
- 11 Dec 2015
Overview
Project2 is an open-source printed circuit board by CourseReps, from the CourseReps/ECEN489-Fall2015 repository on GitHub. It is a 2-layer board of 102.9 × 59.7 mm with 23 parts on 37 nets, routed with 134 tracks and 9 vias.
It is built around the LM7805CT, BS170 and MMBT3906. Its parts include 8 resistors, 5 diodes, 3 connectors, 2 ICs and 2 transistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3LM7805CT
TO-2200℃~+70℃@(Ta) 1 1A 20V 2V@(1A) 40uV 5V 62dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETsMMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
README
README.mdData Acquisition & Embedded Systems
Description
The goal of this multidisciplinary project-based laboratory course is to provide instruction on data acquisition, system-level integration and design through a range of hands-on activities that complement the traditional classroom experience. This includes circuit prototyping, PCB fabrication, microcontrollers and C++ programming, networking, and data visualization. The main focus is on modular application development, algorithms, information management, control and actuation. In addition, emphasis is put on team work, presentation skills, time management, creativity and innovation.
Objectives
- Enhance engineering education by facilitating learning through engineering projects.
- Review the basics of circuit building, programming concepts, computer-aided design tools, the fundamentals of microcontrollers.
- Foster leadership and team work, with division of labor, complementary tasks, discussion and integration.
- Develop the ability to bridge theoretical concepts and practical tasks.
- Master elements of experiential learning such as abstract conceptualization, active experimentation, concrete experience, reflective observation.
- Improve transferable engineering skills and the ability to integrate different concepts.
- Develop confidence and leadership.
- Promote creativity and critical thinking.
- Refine presentation skills and the ability to conduct and manage projects.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2, R3, R4, R5, R6, R7, R8 |
| 3 | LED | LEDs:LED-3MM | D3, D4, D5 |
| 2 | D | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D1, D2 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | BS170 | Housings_TO-92:TO-92_Inline_Narrow_Oval | Q2 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | CONN_01X17 | w_conn_screw:mors_17p | P2 |
| 1 | LM7805CT | Power_Integrations:TO-220 | U1 |
| 1 | MMBT3906 | Power_Integrations:TO-220 | Q1 |
| 1 | Teensy_3.1 | Teensy:Teensy-3.1 | U2 |
The 20 most common of 23 parts.
More from CourseReps/ECEN489-Fall2015
2- 2 layers88.9 × 43.2 mm

- 2 layers67.3 × 24.1 mm

Similar boards
- 2 layers

T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers100 × 100 mm

- 4 layers100 × 100 mm

T41-RF board V012
K0RGI/T41-K9HZ
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
232 parts1GPL-3.0 - 2 layers114 × 89 mm

- 2 layers173 × 85 mm

Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL - 2 layers169.3 × 128 mm

PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96 - 4 layers97.6 × 145.1 mm

Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 4 layers100 × 100 mm

Questions
How big is the Project2 PCB?
It measures 102.9 × 59.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project2 use?
23 parts, built around the LM7805CT, BS170 and MMBT3906. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project2 KiCad files?
From the CourseReps/ECEN489-Fall2015 repository on GitHub, at the commit this page was made from: the board is Students/Cooper95/KiCad/Project2/Project2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask CourseReps before reusing the design.