

- Size
- 91.4 × 116.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 114
- Nets
- 89
- Pads
- 562
- Tracks, vias
- 1,776, 94
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Jul 2015
- Updated
- 26 Oct 2015
Overview
Afx-01 is an open-source printed circuit board by cosmikwolf, from the cosmikwolf/afx-01_hardware repository on GitHub. It is a 2-layer board of 91.4 × 116.8 mm with 114 parts on 89 nets, routed with 1,776 tracks and 94 vias.
It is built around the SAM2695, WS2812B and LL4148. Its parts include 26 capacitors, 25 switches, 19 resistors, 18 diodes and 5 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3SAM2695
QFN-48-EP_6x6-25℃~+70℃ 2.7V~3.6V Processor、Encoder/decoder QFN-48-EP(6x6) Audio Interface ICs ROHSDREAMAudio Interface ICsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedLL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
Parts
114| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | DPST_Switch | afx-01:B3F-1050_6mm_Switch | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15, S16 +9 |
| 16 | WS2812b | afx-01:WS2811_5mm_ThroughHole | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14, LED15, LED16 |
| 8 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C6, C7, C8, C9, C10, C15, C18, C26 |
| 5 | 100µf | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4, C22 |
| 5 | 10k | Resistors_SMD:R_0805_HandSoldering | R3, R12, R13, R14, R15 |
| 5 | 220 | Resistors_SMD:R_0805_HandSoldering | R2, R8, R9, R10, R11 |
| 5 | 4.7k | Resistors_SMD:R_0805_HandSoldering | R7, R16, R17, R18, R19 |
| 3 | 10µfT | Capacitors_SMD:C_0805_HandSoldering | C16, C17, C19 |
| 2 | .01µf | Capacitors_SMD:C_0805_HandSoldering | C23, C24 |
| 2 | 100µfT | Capacitors_SMD:C_0805_HandSoldering | C11, C12 |
| 2 | 1µfT | Capacitors_SMD:C_0805_HandSoldering | C5, C20 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C13, C14 |
| 2 | 47k | Resistors_SMD:R_0805_HandSoldering | R4, R5 |
| 2 | CONN_02X05 | ab2_header:AB2_HDR_M05-2V | P1, P2 |
| 2 | MCP23017-QFN | Housings_DFN_QFN:QFN-28-1EP_6x6mm_Pitch0.65mm | MCP1, MCP2 |
| 2 | MIDI_CONN_FEMALE | Connect:SDS-50J | MIDI_IN1, MIDI_OUT1 |
| 1 | 0 | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | 12MHz | afx-01:Xtal_3.2mm | X1 |
| 1 | 1A | SMD_Packages:SOD-523 | D2 |
| 1 | 220pF | Capacitors_SMD:C_0805_HandSoldering | C21 |
| 1 | 4.7µfT | Capacitors_SMD:C_0805_HandSoldering | C25 |
| 1 | 500 | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 6N139 | Housings_DIP:DIP-8__300_ELL | MIDI_OPTOISOLATOR1 |
| 1 | 742792093 | Capacitors_SMD:C_0805_HandSoldering | L1 |
| 1 | ADA_SSD1306_I2C | ab2_header:AB2_HDR_M08-1V | U1 |
| 1 | Encoder_switch | afx-01:AB2_ROTARY_ENCODER_W_SWITCH | ENC1 |
| 1 | HeadphoneOut | afx-01:Switchcraft_3.5mm_SMD_Stereo | J1 |
| 1 | LL4148 | SMD_Packages:SOD-523 | D1 |
| 1 | LOGO | Logo:zetaOhmLogo | G*** |
| 1 | LOGO | Logo:small Logo Zetaohm | G*** |
| 1 | MicIn | afx-01:Switchcraft_3.5mm_SMD_Stereo | J2 |
| 1 | MicroSD_Adapter | afx-01:MicroSD | U4 |
| 1 | SAM2695 | Housings_DFN_QFN:UQFN-48-1EP_6x6mm_Pitch0.4mm | U3 |
| 1 | SSD1306 | afx-01:SSD1306_XL | U5 |
| 1 | Teensy_3.1 | afx-01:Teensy3.1 | U2 |
The 107 most common of 114 parts.
Similar boards
- 2 layers44 × 32 mm

- 2 layers170 × 64 mm

- 4 layers56 × 87.8 mm

- 2 layers100 × 100 mm

Zxuno1010
UzixLS/zxuno1010-board
10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure
233 parts23MIT - 2 layers34 × 23.4 mm

DWAVE
hkzlab/DWAVE_MIDI_Wavetable
DWAVE is a small General MIDI module for the wavetable connector of your old sound card, based on the SAM2695 chip
28 parts20 - 4 layers92.2 × 44 mm

Karabas megabuzz
andykarpov/karabas-megabuzz
A minimalistic FPGA soundcard for ZX Spectrum
177 parts9MIT - 2 layers21.1 × 14.4 mm

- 2 layers93 × 58.4 mm

Questions
How big is the Afx-01 PCB?
It measures 91.4 × 116.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Afx-01 use?
114 parts, built around the SAM2695, WS2812B and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Afx-01 KiCad files?
From the cosmikwolf/afx-01_hardware repository on GitHub, at the commit this page was made from: the board is afx-01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Afx-01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cosmikwolf before reusing the design.