

Gps radio beacon
Hardware for the GPS Radio Beacon
- Size
- 106.4 × 69.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 58
- Pads
- 188
- Tracks, vias
- 178, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 24 Oct 2022
- Updated
- 15 Nov 2023
Overview
Gps radio beacon is an open-source printed circuit board by cornellrocketryteam, from the cornellrocketryteam/grb-hw repository on GitHub. It is a 2-layer board of 106.4 × 69.7 mm with 42 parts on 58 nets, routed with 178 tracks and 13 vias.
It is built around the RFM95W-915S2 and 1N5228BTR. Its parts include 3 resistors, 3 ICs, 3 connectors, 2 diodes and 1 capacitor. It belongs with the radio and wireless boards and the RP2040 boards of this library.
Main components
2README
README.mdGPS Radio Beacon
This repository contains the hardware design for the GPS Radio Beacon.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 +4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 0466.500NR | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1N5228BTR | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | Adafruit_Ultimate_GPS_Breakout | grb:Adafruit_Ultimate_GPS_Breakout | U2 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | JShort1 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J3 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J1 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | JLong1 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | J2 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LOGO | grb:toilet | G*** |
| 1 | LOGO | grb:crt-logo | G*** |
| 1 | LOGO | grb:coffee | G*** |
| 1 | Pico | RPi_Pico:RPi_Pico_SMD_TH | U1 |
| 1 | RFM95W-915S2 | RF_Module:HOPERF_RFM9XW_SMD | U3 |
Similar boards
- 4 layers25 × 59 mm

- 2 layers98.5 × 34 mm

Pulse LoRa
risejohan/2Bit
In this repo we can see some designs with free use for the community, 2 Bit electronic
86 parts17 - 4 layers45.7 × 90.3 mm

- 6 layers100 × 60 mm

Aether
nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.
180 parts10 - 2 layers78 × 78 mm

Avionics payload
usfsoar/irec-avionics-payload-pcb
KiCad project for the PCB in the payload of SOAR's IREC Rocket
37 parts9 - 4 layers168.2 × 82.9 mm

2024 def con badge v1
RetiaLLC/DefconBadge2026
Retia 2024 DEF CON badge (ESP32-S3): docs, pinouts, flashable firmware incl. DOOM and Meshtastic, examples, KiCad hardware sources
104 parts8 - 2 layers51.8 × 53.6 mm

CatWAN Farmer
ElectronicCats/CatWAN_Farmer
CatWAN Farmer, a grower's water saving open source project with LoRa
53 parts7 - 2 layers54.9 × 95 mm

Board v5
brev-dev/another_esp8266_sensor_board
PCB layout and instructions for a multi-purpose esp8266 sensor device, with optional LORA connectivity.
86 parts5GPL-3.0
Questions
How big is the Gps radio beacon PCB?
It measures 106.4 × 69.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gps radio beacon use?
42 parts, built around the RFM95W-915S2 and 1N5228BTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gps radio beacon KiCad files?
From the cornellrocketryteam/grb-hw repository on GitHub, at the commit this page was made from: the board is gps-radio-beacon.kicad_pcb and its schematic gps-radio-beacon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gps radio beacon design in my own project?
Its repository states no licence, so its author keeps all rights: ask cornellrocketryteam before reusing the design.