
Avionics ground
usfsoar/irec-avionics-payload-pcb
KiCad project for the PCB in the payload of SOAR's IREC Rocket

KiCad project for the PCB in the payload of SOAR's IREC Rocket
Avionics payload is an open-source printed circuit board by usfsoar, from the usfsoar/irec-avionics-payload-pcb repository on GitHub. It is a 2-layer board of 78 × 78 mm with 37 parts on 75 nets, routed with 396 tracks and 35 vias.
It is built around the RFM95W-915S2. Its parts include 7 capacitors, 7 connectors, 4 resistors, 4 ICs and 3 switches.
This is the PCB for the payload of USF Society of Aeronautics and Rocketry's 2019 IREC rocket. The PCB is made in KiCad (pronounced key-cad). The different two parts of the payload are split into the folders payload_ground_pcb, the ground station, and payload_main_pcb, the cubesat payload, under those there are the files are:
The main components of the Cubesat Payload are:
The main components of the Ground Station are:
KiCad is a free and open source software that is available on most desktop OSs. To learn how to use KiCad here is a pretty great tutorial that goes through making a simple PCB. You can go at your own pace but it should take about an hour but after that you should have a pretty good understanding of KiCad.
If you want to add-on to the board the best way would be to create a hierarchical sheet if you are adding on a new subsystem or if you are adjusting the main board try not to adjust (move, rename, etc) items that you do not plan to change.
If you haven't used Git or GitHub before (or you have and just want the commands to make a pull request for this repository) go here.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R4 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_FSMSM | SW1, SW2, SW3 |
| 3 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP1, TP2, TP3 |
| 2 | Conn_02x14_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x14_P2.54mm_Vertical | J1, J4 |
| 1 | 11k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3 |
| 1 | 3.3uF | Capacitor_SMD:CP_Elec_4x3.9 | C7 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 1 | Conn_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Conn_02x08_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x08_P2.00mm_Vertical_SMD | J3 |
| 1 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_132291_Vertical | J7 |
| 1 | LT1129-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | MS5607-02BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J6 |
| 1 | RFM95W-915S2 | RF_Module:HOPERF_RFM9XW_SMD | U1 |
| 1 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | TP4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J5 |
| 1 | Val** | footprints:drawing | Ref** |
| 1 | Val** | footprints:logo | Ref** |
| 1 | ublox_SAM-M8Q | RF_GPS:ublox_SAM-M8Q | U3 |
The 33 most common of 37 parts.

usfsoar/irec-avionics-payload-pcb
KiCad project for the PCB in the payload of SOAR's IREC Rocket


risejohan/2Bit
In this repo we can see some designs with free use for the community, 2 Bit electronic


nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.

RetiaLLC/DefconBadge2026
Retia 2024 DEF CON badge (ESP32-S3): docs, pinouts, flashable firmware incl. DOOM and Meshtastic, examples, KiCad hardware sources

ElectronicCats/CatWAN_Farmer
CatWAN Farmer, a grower's water saving open source project with LoRa

brev-dev/another_esp8266_sensor_board
PCB layout and instructions for a multi-purpose esp8266 sensor device, with optional LORA connectivity.

It measures 78 × 78 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the RFM95W-915S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the usfsoar/irec-avionics-payload-pcb repository on GitHub, at the commit this page was made from: the board is payload_main_pcb/avionics-payload.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask usfsoar before reusing the design.