Skip to the content
2 layers106.4 × 69.7 mmGps radio beacon, the printed circuit board in 3D

Hardware for the GPS Radio Beacon

Size
106.4 × 69.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
58
Pads
188
Tracks, vias
178, 13
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
24 Oct 2022
Updated
15 Nov 2023

Overview

Gps radio beacon is an open-source printed circuit board by cornellrocketryteam, from the cornellrocketryteam/grb-hw repository on GitHub. It is a 2-layer board of 106.4 × 69.7 mm with 42 parts on 58 nets, routed with 178 tracks and 13 vias.

It is built around the RFM95W-915S2 and 1N5228BTR. Its parts include 3 resistors, 3 ICs, 3 connectors, 2 diodes and 1 capacitor. It belongs with the radio and wireless boards and the RP2040 boards of this library.

Main components

2

README

README.md

GPS Radio Beacon

This repository contains the hardware design for the GPS Radio Beacon.

Parts

42
QtyValueFootprintReferences
20TestPointTestPoint:TestPoint_Keystone_5000-5004_MiniatureTP1, TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 +4
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
2200Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
10466.500NRFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
110uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1
11N5228BTRDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2
1Adafruit_Ultimate_GPS_Breakoutgrb:Adafruit_Ultimate_GPS_BreakoutU2
1Conn_01x02Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJShort1
1Conn_01x02Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ3
1Conn_01x04Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_HorizontalJ1
1Conn_01x16Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJLong1
1Conn_CoaxialConnector_Coaxial:SMA_Molex_73251-1153_EdgeMount_HorizontalJ2
1LEDLED_THT:LED_D3.0mmD1
1LOGOgrb:toiletG***
1LOGOgrb:crt-logoG***
1LOGOgrb:coffeeG***
1PicoRPi_Pico:RPi_Pico_SMD_THU1
1RFM95W-915S2RF_Module:HOPERF_RFM9XW_SMDU3

Similar boards

  • 2 layers98.5 × 34 mmPulse LoRa, the printed circuit board in 3D

    Pulse LoRa

    risejohan/2Bit

    In this repo we can see some designs with free use for the community, 2 Bit electronic

    86 parts17
  • 4 layers45.7 × 90.3 mmIo v2-Board, the printed circuit board in 3D

    Io v2-Board

    Maeswoon/UNHSEDS

    great people building dream rockets

    81 parts11
  • 6 layers100 × 60 mmAether, the printed circuit board in 3D

    Aether

    nasheed-x/aether

    Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.

    180 parts10
  • 2 layers78 × 78 mmAvionics payload, the printed circuit board in 3D

    Avionics payload

    usfsoar/irec-avionics-payload-pcb

    KiCad project for the PCB in the payload of SOAR's IREC Rocket

    37 parts9
  • 4 layers168.2 × 82.9 mm2024 def con badge v1, the printed circuit board in 3D

    2024 def con badge v1

    RetiaLLC/DefconBadge2026

    Retia 2024 DEF CON badge (ESP32-S3): docs, pinouts, flashable firmware incl. DOOM and Meshtastic, examples, KiCad hardware sources

    104 parts8
  • 2 layers51.8 × 53.6 mmCatWAN Farmer, the printed circuit board in 3D

    CatWAN Farmer

    ElectronicCats/CatWAN_Farmer

    CatWAN Farmer, a grower's water saving open source project with LoRa

    53 parts7
  • 2 layers54.9 × 95 mmBoard v5, the printed circuit board in 3D

    Board v5

    brev-dev/another_esp8266_sensor_board

    PCB layout and instructions for a multi-purpose esp8266 sensor device, with optional LORA connectivity.

    86 parts5GPL-3.0

Questions

How big is the Gps radio beacon PCB?

It measures 106.4 × 69.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gps radio beacon use?

42 parts, built around the RFM95W-915S2 and 1N5228BTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gps radio beacon KiCad files?

From the cornellrocketryteam/grb-hw repository on GitHub, at the commit this page was made from: the board is gps-radio-beacon.kicad_pcb and its schematic gps-radio-beacon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gps radio beacon design in my own project?

Its repository states no licence, so its author keeps all rights: ask cornellrocketryteam before reusing the design.