

Pepper V2
Pepper PCB based on CosmicWatch v2
- Size
- 99.9 × 62.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 75
- Pads
- 268
- Tracks, vias
- 306, 47
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Aug 2024
- Updated
- 13 Feb 2026
Overview
Pepper V2 is an open-source printed circuit board by cornellpepper, from the cornellpepper/CuWatchPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.9 × 62.5 mm with 73 parts on 75 nets, routed with 306 tracks and 47 vias.
It is built around the LT1807IS8#PBF, MBR0540 and MBR1020VL, with the SJ-43515RS-SMT-TR among its other parts. Its parts include 18 capacitors, 18 resistors, 6 connectors, 5 ICs and 4 diodes. It belongs with the RP2040 boards of this library.
Main components
4LT1807IS8#PBF
SO-8-40℃~+85℃ 1.5uV/℃ 106dB 140V/us 1uA 2 2.5V~12.6V 200uV 3.5nV/√Hz@10kHz 325MHz 700nA 85mA 9mA Built-in compensation、Reverse-phase input protection、Enable/shutdown function Rail-to-Rail Input, Rail-to-Rail Output SO-8 Precision Op Amps ROHSAnalog DevicesPrecision Op AmpsMBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky DiodesMBR1020VL
SOD-123F-55℃~+125℃ 1 Independent 1A 20V 340mV@1A 45A 600uA@20V SOD-123F Schottky Diodes ROHSonsemiSchottky DiodesSJ-43515RS-SMT-TR
SMD-4PSMD-4P Audio Connectors ROHSCUIAudio Connectors
README
README.mdPepper-V2
V2 pepper PCB test
Changes for Rev-3
- Replace the SWD and SWCLK on J7 with some I2C and UART capable GPIOs from Pico. The SWD and SWCLK weren't connected in Rev2 the way I thought they would be
- Replace TMP36 temperature sensor with a TMP235A (similar but cheaper)
- add ability to turn off SiPM 30V from Pico
- make test poinst 1.2mm in diameter (were 0.7mm)
- add logos (woo hoo) and CPERL/CLASSE names
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R8, R11, R12, R16, R18, R20 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | C14, R9, R17, R19 |
| 4 | 1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C11, C12, C18 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C10 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C9 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R15 |
| 2 | MBR0540 | RPi_Pico:SOD123_FAS | D1, D2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H5, H6 |
| 1 | 0.47 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10.0 pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 20 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 22 pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 226k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 24.9k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 249 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 2k Ferrite Bead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 390 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 4.7 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 47 uH | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 1 | 629105150521 | Connector_USB:USB_Micro-B_Wuerth_629105150521_CircularHoles | J2 |
| 1 | 680 pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | ADC_IN | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP4 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J7 |
| 1 | Conn_02x03_Odd_Even | RPi_Pico:CONN_68683-303LF_AMP | J1 |
| 1 | Conn_Coaxial | RPi_Pico:CONN_73137-5003_MOL | BNC1 |
| 1 | DNF | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | GND | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP5 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | LOGO | footprints:pepper_logo_smaller | G*** |
| 1 | LOGO | footprints:pepper_logo | G*** |
| 1 | LT1807IS8#PBF | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | LT3461 | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | MBR1020VL | RPi_Pico:DIOM3616X98N | D3 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_104031-0811 | J3 |
| 1 | PicoW | RPi_Pico:RPi_PicoW_SMD_TH | U3 |
| 1 | SIPM_AMPL | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP2 |
| 1 | SIPM_IN | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP1 |
| 1 | SJ-43515RS-SMT-TR | RPi_Pico:CUI_SJ-43515RS-SMT-TR | J5 |
| 1 | TLV70030_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | TMP235A4DCKR | TMP235A4DCKR:SOT65P210X110-5N | U4 |
| 1 | USR1 | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | V3.3 | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP8 |
| 1 | V5.0 | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP6 |
| 1 | VBUS | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP7 |
| 1 | VS | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP3 |
| 1 | VSYS | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP9 |
| 1 | ~{RESET} | Button_Switch_THT:SW_PUSH_6mm | SW1 |
More from cornellpepper/CuWatchPCB
2- 2 layers119.1 × 62.2 mm

- 2 layers40 × 40 mm

Similar boards
- 2 layers87.6 × 94.6 mm

- 2 layers76.6 × 99.9 mm

- 2 layers21 × 49.5 mm

- 2 layers124 × 79 mm

- 2 layers130 × 80 mm

Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 4 layers142.1 × 143 mm

Flipper black ki cad
Broccoliux/Black-Flipper
A device that out smart Flipper Zero in every aspect.
216 parts7 - 2 layers67 × 84 mm

- 2 layers76.3 × 49.6 mm

Questions
How big is the Pepper V2 PCB?
It measures 99.9 × 62.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pepper V2 use?
73 parts, built around the LT1807IS8#PBF, MBR0540, MBR1020VL and SJ-43515RS-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pepper V2 KiCad files?
From the cornellpepper/CuWatchPCB repository on GitHub, at the commit this page was made from: the board is Pepper-V2.kicad_pcb and its schematic Pepper-V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pepper V2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).