Skip to the content
2 layers99.9 × 62.5 mmPepper V2, the printed circuit board in 3D

Pepper PCB based on CosmicWatch v2

Size
99.9 × 62.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
73
Nets
75
Pads
268
Tracks, vias
306, 47
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Aug 2024
Updated
13 Feb 2026

Overview

Pepper V2 is an open-source printed circuit board by cornellpepper, from the cornellpepper/CuWatchPCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.9 × 62.5 mm with 73 parts on 75 nets, routed with 306 tracks and 47 vias.

It is built around the LT1807IS8#PBF, MBR0540 and MBR1020VL, with the SJ-43515RS-SMT-TR among its other parts. Its parts include 18 capacitors, 18 resistors, 6 connectors, 5 ICs and 4 diodes. It belongs with the RP2040 boards of this library.

Main components

4

README

README.md

Pepper-V2

V2 pepper PCB test

Changes for Rev-3

  • Replace the SWD and SWCLK on J7 with some I2C and UART capable GPIOs from Pico. The SWD and SWCLK weren't connected in Rev2 the way I thought they would be
  • Replace TMP36 temperature sensor with a TMP235A (similar but cheaper)
  • add ability to turn off SiPM 30V from Pico
  • make test poinst 1.2mm in diameter (were 0.7mm)
  • add logos (woo hoo) and CPERL/CLASSE names

Parts

73
QtyValueFootprintReferences
810kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R5, R8, R11, R12, R16, R18, R20
40Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderC14, R9, R17, R19
41 uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C11, C12, C18
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5H1, H2, H3, H4
20.1 uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C10
210 uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4, C9
2100kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R7
21kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R15
2MBR0540RPi_Pico:SOD123_FASD1, D2
2MountingHoleMountingHole:MountingHole_2.2mm_M2H5, H6
10.47 uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
110.0 pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7
120 nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC6
122 pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
1226kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
124.9kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR24
1249Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
12k Ferrite BeadInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL2
1330Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR14
1390Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR13
14.7 uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC8
147 uHInductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolderL1
1629105150521Connector_USB:USB_Micro-B_Wuerth_629105150521_CircularHolesJ2
1680 pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC13
1ADC_INTestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP4
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ7
1Conn_02x03_Odd_EvenRPi_Pico:CONN_68683-303LF_AMPJ1
1Conn_CoaxialRPi_Pico:CONN_73137-5003_MOLBNC1
1DNFResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10
1GNDTestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP5
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD4
1LOGOfootprints:pepper_logo_smallerG***
1LOGOfootprints:pepper_logoG***
1LT1807IS8#PBFPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1LT3461Package_TO_SOT_SMD:TSOT-23-6U1
1MBR1020VLRPi_Pico:DIOM3616X98ND3
1Micro_SD_CardConnector_Card:microSD_HC_Molex_104031-0811J3
1PicoWRPi_Pico:RPi_PicoW_SMD_THU3
1SIPM_AMPLTestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP2
1SIPM_INTestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP1
1SJ-43515RS-SMT-TRRPi_Pico:CUI_SJ-43515RS-SMT-TRJ5
1TLV70030_SOT23-5Package_TO_SOT_SMD:SOT-23-5U5
1TMP235A4DCKRTMP235A4DCKR:SOT65P210X110-5NU4
1USR1Button_Switch_THT:SW_PUSH_6mmSW2
1V3.3TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP8
1V5.0TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP6
1VBUSTestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP7
1VSTestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP3
1VSYSTestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mmTP9
1~{RESET}Button_Switch_THT:SW_PUSH_6mmSW1

More from cornellpepper/CuWatchPCB

2
  • 2 layers40 × 40 mmPepper SiPM, the printed circuit board in 3D

    Pepper SiPM

    cornellpepper/CuWatchPCB

    Pepper PCB based on CosmicWatch v2

    16 partsMIT

Similar boards

  • 2 layers76.6 × 99.9 mmCosmicCoincidence, the printed circuit board in 3D

    CosmicCoincidence

    AndrewMcCandliss/CosmicCoincidence

    31 parts
  • 2 layers21 × 49.5 mmHackducky, the printed circuit board in 3D

    Hackducky

    hackclub/hackducky

    The hackclub themed USB rubber ducky ! - Check out hackducky

    51 parts33
  • 2 layers124 × 79 mmPico profile, the printed circuit board in 3D

    Pico profile

    BwanaFr/pico-profile

    An Apple Profile emulator based on Raspberry Pi Pico MCU

    42 parts14
  • 2 layers130 × 80 mmPico controller, the printed circuit board in 3D

    Pico controller

    cclienti/tig-welder

    A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

    125 parts8GPL-3.0
  • 4 layers142.1 × 143 mmFlipper black ki cad, the printed circuit board in 3D

    Flipper black ki cad

    Broccoliux/Black-Flipper

    A device that out smart Flipper Zero in every aspect.

    216 parts7
  • 2 layers67 × 84 mmEcp5 soc hat, the printed circuit board in 3D

    Ecp5 soc hat

    daveshah1/ecp5-hat

    SoC hat for ECP5 Versa & EVN boards

    34 parts6
  • 2 layers76.3 × 49.6 mmEls esp32, the printed circuit board in 3D

    Els esp32

    guidoschreuder/els-esp32

    Port of Clough42's electronic leadscrew to ESP32

    63 parts6

Questions

How big is the Pepper V2 PCB?

It measures 99.9 × 62.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pepper V2 use?

73 parts, built around the LT1807IS8#PBF, MBR0540, MBR1020VL and SJ-43515RS-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pepper V2 KiCad files?

From the cornellpepper/CuWatchPCB repository on GitHub, at the commit this page was made from: the board is Pepper-V2.kicad_pcb and its schematic Pepper-V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pepper V2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).