

TapBeerFlowControl hardware
Hardware developed to control the volume dispensed from a tap beer (or any other liquid, such as water).
- Size
- 58.2 × 62.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 42
- Pads
- 84
- Tracks, vias
- 59, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 5 Dec 2023
- Updated
- 16 Dec 2024
Overview
TapBeerFlowControl hardware is an open-source printed circuit board by conradoad, from the conradoad/TapBeerVolumeControl_Hardware repository on GitHub. It is a 2-layer board of 58.2 × 62.6 mm with 22 parts on 42 nets, routed with 59 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE and BC547. Its parts include 6 connectors, 3 resistors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdTap Beer Flow Control - Hardware
Hardware developed to control the volume dispensed from a tap beer (or any other liquid, such as water).
View the testing firmware in this repository: TapBeerVolumeControl_Firmware
Hardware Components
- ESP32 DevKitC
- Flow Sensor
- Solenoid Valve
Mounted PCB
- Schematic (KiCAD)
- PCB Layout (KiCAD)
- Prototype (using a router CNC)
Demo Video
TODO: upload video
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_5mm | H1, H2, H3, H4 |
| 2 | 18k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 1 | 10u | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C1 |
| 1 | 12_VIN | KF301_2P:KF3012P | J1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D2 |
| 1 | 1u | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C2 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_HandSolder | Q1 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U2 |
| 1 | JQC-3FC_T73_DC05V | JQC-3FC_T73_DC05V:JQC3FCT73DC05V | K1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | SEL1 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | SEL2 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | SEL3 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J5 |
| 1 | SENSOR | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_PUSH_6mm_H8mm | SW1 |
| 1 | VALVE_OUT | KF301_2P:KF3012P | J6 |
Similar boards
- 2 layers88.9 × 98.1 mm

- 2 layers98.1 × 100.7 mm

- 2 layers103.8 × 50 mm

Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers115 × 75 mm

SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm

ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42 - 2 layers62.2 × 57.1 mm

- 2 layers99.9 × 99.9 mm

- 2 layers

Questions
How big is the TapBeerFlowControl hardware PCB?
It measures 58.2 × 62.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TapBeerFlowControl hardware use?
22 parts, built around the ESP32-DEVKITC-VE and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TapBeerFlowControl hardware KiCad files?
From the conradoad/TapBeerVolumeControl_Hardware repository on GitHub, at the commit this page was made from: the board is TapBeerFlowControl_hardware.kicad_pcb and its schematic TapBeerFlowControl_hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TapBeerFlowControl hardware design in my own project?
Its repository states no licence, so its author keeps all rights: ask conradoad before reusing the design.