

Dispen-4
- Size
- 98.1 × 100.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 82
- Pads
- 198
- Tracks, vias
- 245, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Jun 2025
- Updated
- 28 Nov 2025
Overview
Dispen-4 is an open-source printed circuit board by Mariano-Juarez, from the Mariano-Juarez/Proyectos repository on GitHub. It is a 2-layer board of 98.1 × 100.7 mm with 59 parts on 82 nets, routed with 245 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE and BC547. Its parts include 18 resistors, 9 connectors, 8 diodes, 6 ICs and 4 transistors. It belongs with the ESP32 boards of this library.
Main components
2Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | R | Resistor_SMD:R_0805_2012Metric | R1, R3, R4, R5, R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J1, J2, J3, J4, J6, J7, J8, J9 |
| 4 | BC547 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2, Q3, Q4 |
| 4 | DIODE | Diode_SMD:D_SMA | D2, D4, D6, D8 |
| 4 | G6AU | Relay_THT:Relay_DPDT_Omron_G6A | K1, K2, K3, K4 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D3, D5, D7 |
| 4 | PC817 | pc817:DIP762W50P254L495H455Q4 | U1, U2, U3, U4 |
| 3 | 1KΩ | Resistor_SMD:R_0805_2012Metric | R6, R7, R17 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | Screw_Terminal_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | OLED1, Ultrasonido1 |
| 1 | 1,5KΩ | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 10KΩ | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 220Ω | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J10 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | ESP32_DEVKITC | escuelA:ESP32S | U7 |
| 1 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LM7805_TO220 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U6 |
| 1 | Motor_Servo | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | M1 |
More from Mariano-Juarez/Proyectos
4- 2 layers

- 2 layers

- 2 layers40 × 40 mm

- 2 layers

Similar boards
- 2 layers58.2 × 62.6 mm

TapBeerFlowControl hardware
conradoad/TapBeerVolumeControl_Hardware
Hardware developed to control the volume dispensed from a tap beer (or any other liquid, such as water).
22 parts - 2 layers88.9 × 98.1 mm

- 2 layers103.8 × 50 mm

Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers115 × 75 mm

SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm

ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42 - 2 layers62.2 × 57.1 mm

- 2 layers99.9 × 99.9 mm

- 2 layers

Questions
How big is the Dispen-4 PCB?
It measures 98.1 × 100.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dispen-4 use?
59 parts, built around the ESP32-DEVKITC-VE and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dispen-4 KiCad files?
From the Mariano-Juarez/Proyectos repository on GitHub, at the commit this page was made from: the board is Hardware/pepito simple terminado/dispen-4.kicad_pcb and its schematic Hardware/Pepito Gang/dispen-4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dispen-4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Mariano-Juarez before reusing the design.