

Testboard v1
The Powerglove
- Size
- 70 × 59 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 76
- Pads
- 163
- Tracks, vias
- 230, 117
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Feb 2026
- Updated
- 8 May 2026
Overview
Testboard v1 is an open-source printed circuit board by connormichalec, from the connormichalec/Universal-Gesture-Interface repository on GitHub. It is a 2-layer board of 70 × 59 mm with 39 parts on 76 nets, routed with 230 tracks and 117 vias.
It is built around the ICM-20948 and BSS138. Its parts include 13 capacitors, 10 connectors, 6 resistors, 3 ICs and 2 transistors. It belongs with the STM32 boards of this library.
Main components
2ICM-20948
QFN-24(3x3)-40℃~+85℃ 0.5KB 1.71V~3.6V 16bit 8uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 4 | Conn_01x01 | TestPoint:TestPoint_Pad_1.5x1.5mm | J9, J10, J11, J12 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12, C13 |
| 2 | 1 uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J13 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | 1k1, 1k2 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | Programmer1 |
| 1 | FLEX pin1 | TestPoint:TestPoint_Pad_1.5x1.5mm | J1 |
| 1 | FLEX pin2 | TestPoint:TestPoint_Pad_1.5x1.5mm | J2 |
| 1 | FSR pin1 | TestPoint:TestPoint_Pad_1.5x1.5mm | J4 |
| 1 | FSR pin2 | TestPoint:TestPoint_Pad_1.5x1.5mm | J3 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | Leave_Open1 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | Reset1 |
| 1 | TLV70018_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
More from connormichalec/Universal-Gesture-Interface
2- 2 layers70 × 59 mm

- 2 layers60 × 60 mm

Similar boards
- 4 layers95 × 95 mm

Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
52 parts1.1kGPL-3.0 - 4 layers36.6 × 60.3 mm

StratoSoar MK3.0
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
85 parts43 - 4 layers42 × 42 mm

Dynossat edu obc
BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files
60 parts14 - 4 layers50 × 50 mm

MCU AURA
alexander-armitage/AURA-Hardware
AURA is a set of modular PCBs designed in KiCad for versatile robotics and aerospace applications — from drones and quadrupeds to rockets.
113 parts4MIT - 2 layers14.8 × 20 mm

Kits prettyvis
SpinWearables/SpinWheelHardware
The hardware design files for the SpinWheel.
57 parts2GPL-3.0 - 2 layers0.7 × 0.5 mm

- 4 layers40 × 36 mm

Drone v0-00
Haruki-Ayukawa/Full_Scratch_Drone
ESP32搭載基板、プリンタで造形したフレーム、ショップで購入したモータ・プロペラ・LiPoバッテリを用いてフルスクラッチのドローンを製作しました。
55 parts1MIT - 4 layers55.9 × 25.4 mm

EnchantiS3
aburt2/EnchantiS3
Repository for the hardware and firmware files for the EnchantiS3 board
68 parts
Questions
How big is the Testboard v1 PCB?
It measures 70 × 59 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Testboard v1 use?
39 parts, built around the ICM-20948 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Testboard v1 KiCad files?
From the connormichalec/Universal-Gesture-Interface repository on GitHub, at the commit this page was made from: the board is PCBs/testboard/V1/testboard_v1.kicad_pcb and its schematic PCBs/finalboard/V1/finalboard_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Testboard v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask connormichalec before reusing the design.