2 layers142.1 × 106 mm
2 layers61 × 99.5 mm
Input Adapter
computergeek1507/PB_1678Open source FPP PB16 Pixel Controller
- Size
- 61 × 99.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 40
- Pads
- 144
- Tracks, vias
- 252, 82
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Aug 2019
- Updated
- 5 Oct 2026
Overview
Input Adapter is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 61 × 99.5 mm with 16 parts on 40 nets, routed with 252 tracks and 82 vias.
It is built around the AMS1117-3.3, SBH11-PBPC-D20-ST-BK and 302-S241. Its parts include 5 connectors, 2 capacitors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
3
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SBH11-PBPC-D20-ST-BK
直插,P=2.54mmStraight,P=2.54mm Wire To Board Connector ROHSSullins Connector SolutionsWire To Board Connector302-S241
插件Wire To Board ConnectorOn-Shore Tech
README
PB16_2_PI/README.mdCopyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
PB16-2-PI
This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.
To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 3.3v Jmp | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Expansion Header | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J3 |
| 1 | Expansion Header | 302-S241:OST_302-S241 | J2 |
| 1 | Kulp | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | LOGO | Scotts:chewi_15 | G*** |
| 1 | Raspberry_Pi_2_3 | MCU_RaspberryPi_and_Boards:Raspberry_Pi_Hat_Socketed_THT_FaceDown_MountingHoles | J1 |
| 1 | Wally | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J4 |
The 14 most common of 16 parts.
Questions
How big is the Input Adapter PCB?
It measures 61 × 99.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Input Adapter use?
16 parts, built around the AMS1117-3.3, SBH11-PBPC-D20-ST-BK and 302-S241. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Input Adapter KiCad files?
From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is Input_Adapter/Input_Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Input Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.
More from computergeek1507/PB_16
12- 2 layers148.8 × 116.9 mm
- 2 layers142.1 × 99.9 mm
- 2 layers148.8 × 116.9 mm
- 2 layers142.1 × 93 mm
- 2 layers151.1 × 93.4 mm
- 2 layers148.1 × 102.6 mm
- 2 layers148.6 × 76.4 mm
- 2 layers83.2 × 71.4 mm
- 2 layers100 × 90.4 mm
- 2 layers148.6 × 75.5 mm
- 2 layers90.1 × 71.4 mm
Similar boards
- 2 layers61.1 × 96.4 mm
- 2 layers22 × 56 mm
- 2 layers290.1 × 130 mm
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
