Skip to the content
2 layers148.6 × 76.4 mmPB 16, the printed circuit board in 3D

Open source FPP PB16 Pixel Controller

Size
148.6 × 76.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
83
Nets
89
Pads
282
Tracks, vias
442, 20
Pours
6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Aug 2019
Updated
5 Oct 2026

Overview

PB 16 is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 148.6 × 76.4 mm with 83 parts on 89 nets, routed with 442 tracks and 20 vias.

It is built around the 74HCT541D, 08055C104KAT2A and UWT1C100MCL1GB, with the 150080VS75000, SBH11-PBPC-D20-ST-BK and OSTYK51102030 among its other parts. Its parts include 35 resistors, 19 connectors, 16 fuses, 3 capacitors and 3 diodes.

Main components

6

README

PB16_2_PI/README.md

Copyright and Disclaimer

Copyright: Scott Hanson

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

PB16-2-PI

This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.

To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.

Image of PI Adapter

Parts

83
QtyValueFootprintReferences
16100Resistor_SMD:R_0603_1608MetricR20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35
1633ohmResistor_SMD:R_0603_1608MetricR4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19
163544-2Scotts:FUSE_3544-2F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16
4MountingHoleScotts:MountingHole_3.7mmH1, H2, H3, H4
20.1uFCapacitor_SMD:C_0402_1005MetricC1, C2
22.2KResistor_SMD:R_0603_1608MetricR1, R2
274HCT541Package_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1, U2
110uFCapacitor_SMD:CP_Elec_4x5.3C3
1330Resistor_SMD:R_0603_1608MetricR3
15V LEDLED_SMD:LED_0603_1608MetricD5
1Expansion HeaderConnector_IDC:IDC-Header_2x20_P2.54mm_VerticalJ19
1LOGOScotts:chewi_15G***
1Power In LeftBarrier_Blocks:BARRIER_BLOCK_1ROW_2POS_P9.5MMJ17
1Power In RightBarrier_Blocks:BARRIER_BLOCK_1ROW_2POS_P9.5MMJ18
1String1Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ1
1String10Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ10
1String11Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ11
1String12Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ12
1String13Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ13
1String14Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ14
1String15Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ15
1String16Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ16
1String2Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ2
1String3Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ3
1String4Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ4
1String5Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ5
1String6Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ6
1String7Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ7
1String8Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ8
1String9Scotts:PhoenixContact_MCV_3.81mm_3.5mm_1x03_VerticalJ9
1VIN1 LEDLED_SMD:LED_0603_1608MetricD3
1VIN2 LEDLED_SMD:LED_0603_1608MetricD4

More from computergeek1507/PB_16

12
  • 2 layers142.1 × 106 mmPi CM4 16, the printed circuit board in 3D

    Pi CM4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    118 parts78
  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    116 parts78
  • 2 layers142.1 × 99.9 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    112 parts78
  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    102 parts78
  • 2 layers142.1 × 93 mmPi Zero W 16, the printed circuit board in 3D

    Pi Zero W 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    102 parts78
  • 2 layers151.1 × 93.4 mmESP32-P4 16, the printed circuit board in 3D

    ESP32-P4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    99 parts78
  • 2 layers148.1 × 102.6 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    90 parts78
  • 2 layers83.2 × 71.4 mmReceiver Out, the printed circuit board in 3D

    Receiver Out

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    68 parts78
  • 2 layers100 × 90.4 mmPi Zero 24 Diff, the printed circuit board in 3D

    Pi Zero 24 Diff

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    62 parts78
  • 2 layers148.6 × 75.5 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    59 parts78
  • 2 layers90.1 × 71.4 mmWingsStation, the printed circuit board in 3D

    WingsStation

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    57 parts78
  • 2 layers93 × 87.7 mmPB 8 DMX, the printed circuit board in 3D

    PB 8 DMX

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    51 parts78

Similar boards

  • 2 layers148.6 × 76.6 mmPB 16, the printed circuit board in 3D

    PB 16

    kitspace-test-repos/kicad6-file-collection

    73 partsMIT
  • 2 layers22 × 56 mm3to4 Plug, the printed circuit board in 3D

    3to4 Plug

    computergeek1507/KiCad_Designs

    KiCad PCB Designs

    5 parts10
  • 2 layers50.8 × 25.4 mmXiegu MiniMic, the printed circuit board in 3D

    Xiegu MiniMic

    jzkmath/Xiegu-MiniMic

    A Small Microphone for the Xiegu G90, X5105 and X6100 Radios

    22 parts17GPL-2.0
  • 4 layers255 × 127 mmSCART switcher, the printed circuit board in 3D

    SCART switcher

    nunosousa/SCART-switcher

    An old school SCART switcher. Its main purpose will be to automaticaly detect and switch the video output to the active input video source.

    613 parts
  • 4 layers76 × 115 mmAudioVis, the printed circuit board in 3D

    AudioVis

    TerrenceCao1/AudioVisPCB

    PCB for my Audio Visualizer

    13 parts
  • 4 layers75 × 59.2 mmData logger, the printed circuit board in 3D

    Data logger

    Mutzi1211/Wasserrakete

    Ein Überblick über alle Projektbestandteile – von CAD über Code bis zu Anforderungen und Abgaben.

    65 parts1
  • 2 layers140 × 90 mmJulio cool clock, the printed circuit board in 3D

    Julio cool clock

    jaramirez10/jramirez-clock

    My custom PCB clock!

    60 parts

Questions

How big is the PB 16 PCB?

It measures 148.6 × 76.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PB 16 use?

83 parts, built around the 74HCT541D, 08055C104KAT2A, UWT1C100MCL1GB and 150080VS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PB 16 KiCad files?

From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is 16_Expansion_SMD/PB_16.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PB 16 design in my own project?

Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.