
Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers

Ein Überblick über alle Projektbestandteile – von CAD über Code bis zu Anforderungen und Abgaben.
Data logger is an open-source printed circuit board by Mutzi1211, from the Mutzi1211/Wasserrakete repository on GitHub. It is a 4-layer board of 75 × 59.2 mm with 65 parts on 128 nets, routed with 709 tracks and 81 vias.
It is built around the CH340C, ESP32-S3-WROOM-2-N32R8V and BME280, with the AP2112K-3.3TRG1, ICM-20948 and MAX17048G+T10 among its other parts. Its parts include 22 resistors, 13 capacitors, 12 connectors, 9 ICs and 2 diodes. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Ein Überblick über alle Projektbestandteile – von CAD über Code bis zu Anforderungen und Abgaben.
3D-Modelle und technische Zeichnungen zur Rakete.
📁 Rakete
➤ Enthält die CAD-Dateien des Raketenmodells
➤ Dient zur Fertigung
📄 Rakete.pdf
➤ Zeichnung für die Rakete
Die komplette Firmware für den Datenlogger (ESP32, SD-Logging, Webserver etc.)
Alle Dateien zur Platine für den Datenlogger.
📁 data_logger
➤ PCB-Design, dass alles auf einer Platine ist. Leider nicht mehr fertig geworden, aber wichtig für die Reproduktion
📁 Prototyp
➤ Aktuelle Stand. Zusammengesteckt aus verschiedenen Bauteilen und auf einem 3D-Druck Boden montiert.
📄 PCB.pdf
➤ Visualisierung der geplanten PCBs.
📄 Schematic.pdf
➤ Schematic des geplanten PCBs.
Projektplanung, Funktionsdefinitionen und Anforderungen.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R0 | R0:RESC2013X84N | R7, R9, R10, R11, R12, R15 |
| 6 | R4.7k | R4.7k:RESC2012X50N | R5, R6, R8, R20, R21, R22 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | MCU0805MD1000BP100 | R1k:RESC2012X55N | R13, R14, R16 |
| 2 | 0.1uF | C0.1uF:CAPC2012X94N | C6, C7 |
| 2 | 01.uF | C0.1uF:CAPC2012X94N | C8, C11 |
| 2 | 08055C104KAT2A | C0.1uF:CAPC2012X94N | C2, C3 |
| 2 | 10k | R10k:RESC1608X55N | R3, R4 |
| 2 | 150080RS75000 | LED-red:LEDC2012X80N | PowerLED1, PowerLED2 |
| 2 | 1uF | C1uF:CAPC2012X140N | C4, C5 |
| 2 | 330k | R330k:RESC2012X50N | R17, R18 |
| 2 | 5.1k | R5.1k:RESC3116X65N | R1, R2 |
| 2 | C10uF | C10uF:CAPC1005X70N | C9, C10 |
| 2 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5, J7 |
| 2 | Conn_01x20_Pin | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J3, J4 |
| 1 | 045138008100858+ | SD-Card-Slot-2:045138008100858 | J2 |
| 1 | 10uF | C10uF:CAPC1005X70N | C1 |
| 1 | 1769 | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J11 |
| 1 | 3A-10V-280mV | D-3A-10V-300mV:SOD2513X110N | D1 |
| 1 | AP2112K-3.3TRG1 | AP2112K-3.3V:SOT95P282X130-5N | IC6 |
| 1 | BME280 | BME280:BME280 | HM1 |
| 1 | C2.2uF | C2.2uF:CAPC2012X145N | C13 |
| 1 | C4.7uF | C4.7uF:C0805 | C12 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Conn_01x03_Pin | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | J6 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J8 |
| 1 | ESP32-S3-WROOM-2-N32R8V | ESP32-S3-WROOM-2:ESP32S3WROOM2N32R8V | IC1 |
| 1 | ICM-20948 | ICM-20948:QFN40P300X300X105-25N-D | IC7 |
| 1 | LiPo | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | J9 |
| 1 | MAX17048G+T10 | sparkfun_import:DFN-8 | IC3 |
| 1 | MBT3904DW1T1G | MBT3904DW1T1G:SOT65P210X110-6N | IC2 |
| 1 | MCP73831T-2ACI_OT | MCP73831:SOT95P270X145-5N | IC8 |
| 1 | MIC94310-GYMT-TR | MIC94310-GYMT-TR:SON50P155X120X60-5N-D | IC4 |
| 1 | R2.2k | R2.2k:RESC2013X65N | R19 |
| 1 | TXS0108E | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J10 |
| 1 | TXS0108EQPWRQ1 | TXS0108E:SOP65P640X120-20N | IC5 |
| 1 | UJ32-C-H-G-H2-SMT-TR | USB-C:UJ32CHGH2SMTTR | J1 |
| 1 | VLMY234ABCA-GS08 | LED-yellow:LEDM2214X140N | LED1 |
| 1 | ~ | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | J12 |

shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers



SantiBarrios2002/mtp-f26-teamc
MTP F26 (UPC) Team C workspace: radio link budget, RFM69 firmware, protocol simulator

adamcritchley/syzygy-breakout-flash-LVL
SYZYGY Breakout Board with level shifters for any voltage flash chip



Robsic/gps-imu-interface-board
Hardware, firmware e documentação da placa GPS/IMU e interface de encoders do carrinho elétrico RobSIC.
It measures 75 × 59.2 mm and has 4 copper layers, 1.6 mm thick.
65 parts, built around the CH340C, ESP32-S3-WROOM-2-N32R8V, BME280 and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Mutzi1211/Wasserrakete repository on GitHub, at the commit this page was made from: the board is Elektronik/data_logger/data_logger.kicad_pcb and its schematic Elektronik/Prototyp/prototyp/Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Mutzi1211 before reusing the design.