Skip to the content
2 layers162.6 × 59.2 mmBBB 16 Flex, the printed circuit board in 3D

Open source FPP PB16 Pixel Controller

Size
162.6 × 59.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
107
Pads
253
Tracks, vias
414, 116
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Aug 2019
Updated
5 Oct 2026

Overview

BBB 16 Flex is an open-source printed circuit board by computergeek1507, from the computergeek1507/PB_16 repository on GitHub. It is a 2-layer board of 162.6 × 59.2 mm with 37 parts on 107 nets, routed with 414 tracks and 116 vias.

It is built around the UA9638CP and 24LC256-I/P. Its parts include 8 connectors, 6 switches, 5 resistors, 4 capacitors and 3 ICs.

Main components

2

README

PB16_2_PI/README.md

Copyright and Disclaimer

Copyright: Scott Hanson

This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.

You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions

PB16-2-PI

This is an adapter to use a Raspberry Pi W with the PB16 Cape instead of a PocketBeagle. This only supports the 16 local ports and the serial ports. The Expansion header does not work. Open source applications were used to create this PCB. KiCad was used for the PCB design, and LibreOffice for the documentation.

To order your own PCB upload the gerber.zip file to your favorite PCB manufacture of choice, I personally use jlcpcb.com.

Image of PI Adapter

Parts

37
QtyValueFootprintReferences
30.1uFCapacitor_SMD:C_0805_2012MetricC3, C4, C5
2120Resistor_SMD:R_0805_2012MetricR2, R3
24.7KResistor_SMD:R_0805_2012MetricR4, R5
2SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2
1
1100uFCapacitor_SMD:CP_Elec_6.3x5.4_NichiconC1
11KResistor_SMD:R_0805_2012MetricR1
124LC256Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
15V LEDLED_SMD:LED_0805_2012MetricD1
1BEAGLEBONEBLACKScotts:BEAGLEBONEBLACKU1
1Back BTNButton_Switch_THT:SW_PUSH_6mmSW4
1DMX1Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_VerticalJ7
1DMX2Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_VerticalJ8
1Down/Test BTNButton_Switch_THT:SW_PUSH_6mmSW3
1Enter BTNButton_Switch_THT:SW_PUSH_6mmSW5
1LOGOScotts:chewi_15G***
1MountingHole_2.2mm_M2_ISO7380MountingHole:MountingHole_2.2mm_M2_ISO7380S2
1OLED ConnOLED-SSD1306-128X64-I2C:OLED-SSD1306-128X64-I2C-THTJ5
1Output 1Connector_IDC:IDC-Header_2x12_P2.54mm_VerticalJ1
1Output 2Connector_IDC:IDC-Header_2x12_P2.54mm_VerticalJ2
1Output 3Connector_IDC:IDC-Header_2x12_P2.54mm_VerticalJ3
1PWR_BUTTONButton_Switch_THT:SW_PUSH_6mmSW1
1Power SelectConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ9
1RTC ConnConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ4
1UA9638CPPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1Up BTNButton_Switch_THT:SW_PUSH_6mmSW2

The 31 most common of 37 parts.

More from computergeek1507/PB_16

12
  • 2 layers142.1 × 106 mmPi CM4 16, the printed circuit board in 3D

    Pi CM4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    118 parts78
  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    116 parts78
  • 2 layers142.1 × 99.9 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    112 parts78
  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    102 parts78
  • 2 layers142.1 × 93 mmPi Zero W 16, the printed circuit board in 3D

    Pi Zero W 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    102 parts78
  • 2 layers151.1 × 93.4 mmESP32-P4 16, the printed circuit board in 3D

    ESP32-P4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    99 parts78
  • 2 layers148.1 × 102.6 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    90 parts78
  • 2 layers148.6 × 76.4 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    83 parts78
  • 2 layers83.2 × 71.4 mmReceiver Out, the printed circuit board in 3D

    Receiver Out

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    68 parts78
  • 2 layers100 × 90.4 mmPi Zero 24 Diff, the printed circuit board in 3D

    Pi Zero 24 Diff

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    62 parts78
  • 2 layers148.6 × 75.5 mmPB 16, the printed circuit board in 3D

    PB 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    59 parts78
  • 2 layers90.1 × 71.4 mmWingsStation, the printed circuit board in 3D

    WingsStation

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    57 parts78

Similar boards

  • 2 layers148.8 × 116.9 mmBBB 16, the printed circuit board in 3D

    BBB 16

    kitspace-test-repos/kicad6-file-collection

    115 partsMIT
  • 2 layers90.2 × 48.3 mmMOBO SMD, the printed circuit board in 3D

    MOBO SMD

    lkesteloot/alice

    Website documenting a hardware project from the 1990s.

    64 parts79Apache-2.0
  • 2 layers100 × 67 mmBms, the printed circuit board in 3D

    Bms

    scttnlsn/bms

    Battery management system for 4-series li-ion packs

    52 parts67
  • 2 layers160 × 100 mmCodyComputer, the printed circuit board in 3D

    CodyComputer

    fjmilens3/cody-computer

    Design files and source code for the Cody Computer.

    59 parts64GPL-3.0
  • 4 layers100 × 49.8 mmExpansion board, the printed circuit board in 3D

    Expansion board

    reubenstr/zuko

    A quadruped robot dog!

    75 parts51MIT
  • 2 layers81.3 × 96.5 mmMidi2cv, the printed circuit board in 3D

    Midi2cv

    tomarus/midi2cv

    Eurorack MIDI2CV and Arpeggiator using an Arduino Nano.

    63 parts31
  • 4 layers63.6 × 67.5 mmPropellerPCB, the printed circuit board in 3D

    PropellerPCB

    tomkinsc/open-spectrometer

    Code, mechanical designs, and electronic plans related to the OpenSpectrometer project.

    76 parts30
  • 2 layers108.4 × 70 mmUser Expansion, the printed circuit board in 3D

    User Expansion

    Ashet-Technologies/Home-Computer

    A retro-inspired home-computer project.

    858 parts20CERN-OHL-P-2.0

Questions

How big is the BBB 16 Flex PCB?

It measures 162.6 × 59.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BBB 16 Flex use?

37 parts, built around the UA9638CP and 24LC256-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BBB 16 Flex KiCad files?

From the computergeek1507/PB_16 repository on GitHub, at the commit this page was made from: the board is BBB_16_Flex/BBB_16_Flex.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BBB 16 Flex design in my own project?

Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.