

ESP32 Controller
KiCad PCB Designs
- Size
- 84.8 × 88.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 54
- Pads
- 177
- Tracks, vias
- 247, 63
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Mar 2020
- Updated
- 4 May 2026
Overview
ESP32 Controller is an open-source printed circuit board by computergeek1507, from the computergeek1507/KiCad_Designs repository on GitHub. It is a 2-layer board of 84.8 × 88.1 mm with 44 parts on 54 nets, routed with 247 tracks and 63 vias.
It is built around the ESP32-POE, SN74HCT245N and LM7805, with the RJ45 among its other parts. Its parts include 14 connectors, 9 fuses, 4 capacitors, 4 ICs and 3 resistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4ESP32-POE
-WiFi ModulesOlimex Ltd.SN74HCT245N
DIP-20-40℃~+85℃ 1 14ns@5.5V,50pF 4.5V~5.5V 6mA 6mA 74HCT 8 80uA Bidirectional Tri-State DIP-20 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversLM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
Power_Breakout_Fused2/README.mdCopyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Fused Power Breakout
Power Fused Breakout Board for HP Power Supply

Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 3544-2 | Keystone_Fuse:FUSE_3544-2 | F1, F2, F3, F4, F5, F6, F7, F8, F9 |
| 4 | MountingHole_3.5mm | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4 |
| 2 | 0.1uF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C3, C4 |
| 2 | 150 | Resistor_THT:R_Array_SIP8 | RN1, RN2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 56 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | DMX1 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J11 |
| 1 | DMX2 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J13 |
| 1 | ESP32-POE | ESP32-DEVKITC:XCVR_ESP32-POE | U1 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | Power In | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type701_RT11L02HGLU_1x02_P6.35mm_Horizontal | J9 |
| 1 | Program | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J12 |
| 1 | RX Jumper | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | SN74HCT245N | SN74HCT245N:SN74HCT245N | U3 |
| 1 | SP3485CP | Package_DIP:DIP-8_W7.62mm | U4 |
| 1 | Status LED | LED_THT:LED_D3.0mm | D1 |
| 1 | String1 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J1 |
| 1 | String2 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J2 |
| 1 | String3 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J3 |
| 1 | String4 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J4 |
| 1 | String5 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J5 |
| 1 | String6 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J6 |
| 1 | String7 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J7 |
| 1 | String8 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical | J8 |
| 1 | User Input | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J14 |
| 1 | Vin Select | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
The 43 most common of 44 parts.
More from computergeek1507/KiCad_Designs
12- 2 layers142.1 × 90.8 mm

- 2 layers67.8 × 64 mm

- 2 layers85.1 × 89.9 mm

- 2 layers85.5 × 40.3 mm

- 2 layers85.1 × 91.6 mm

- 2 layers47.8 × 27.7 mm

- 2 layers34.1 × 42 mm

- 2 layers84.5 × 59 mm

- 2 layers62 × 85 mm

- 2 layers63.4 × 85 mm

- 2 layers65 × 56 mm

- 2 layers23 × 62 mm

Similar boards
- 2 layers91.1 × 100 mm

- 2 layers186.8 × 87.1 mm

ESP32 Alarm PCB
AlexTischer/ESP32PoEAlarm
This repository contains all files related to the ESP32-Alarm board project.
35 parts - 2 layers94.3 × 66 mm

- 2 layers122.6 × 80.6 mm

- 4 layers100 × 54 mm

- 2 layers

- 2 layers148.8 × 116.9 mm

- 2 layers100.4 × 56.8 mm

ALU
Robert-Riordan-UCD/8_Bit_CPU_PCB
PCB version of Ben Eaters 8-bit breadboard computer
37 partsCERN-OHL-P-2.0
Questions
How big is the ESP32 Controller PCB?
It measures 84.8 × 88.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 Controller use?
44 parts, built around the ESP32-POE, SN74HCT245N, LM7805 and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 Controller KiCad files?
From the computergeek1507/KiCad_Designs repository on GitHub, at the commit this page was made from: the board is ESP32_Controller_Eth_SD_POE/ESP32_Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask computergeek1507 before reusing the design.