
Thingy
compressedfish/SAFMC-2025-catE-dev
meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa

meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa
Cameraadapt is an open-source printed circuit board by compressedfish, from the compressedfish/SAFMC-2025-catE-dev repository on GitHub, published under the MIT licence. It is a 4-layer board of 25 × 25 mm with 34 parts on 46 nets, routed with 349 tracks and 59 vias.
It is built around the ADP1231 and DMG1024UV. Its parts include 9 resistors, 7 capacitors, 6 inductors, 3 ICs and 3 connectors.
meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa
pcb/keyboard - general sensor and electronics assembly backplane thingy
pcb/cameraadapt - testing board for OV2312/OV9782 RGB-IR camera modules
todo:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6 |
| 5 | 1u | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | L_Ferrite_Coupled_Small_1243 | Inductor_SMD:L_CommonModeChoke_Coilcraft_0603USB | L2, L3, L4 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | ADP123 | Package_TO_SOT_SMD:TSOT-23-5 | U3, U4 |
| 2 | L | Inductor_SMD:L_0603_1608Metric | L1, L5 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 2.2u | Inductor_SMD:L_1008_2520Metric | L6 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 27MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | AP3429K | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | Conn_01x22_MountingPin | Connector_FFC-FPC:Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal | J5 |
| 1 | Conn_01x24_MountingPin | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J2 |
| 1 | Conn_01x30_MountingPin | Connector_FFC-FPC:Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_Horizontal | J1 |
| 1 | DMG1024UV | Package_TO_SOT_SMD:SOT-563 | Q1 |

compressedfish/SAFMC-2025-catE-dev
meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa



elagil/net-bmp
An Ethernet-connected SWD/JTAG debug adapter (blackmagic probe)

ahsanu123/ireng
✒️ Ireng Probe - A custom Black Magic Probe with STM32F103RC.

befinitiv/cmd-z5-pager
Replacement PCB & Software to turn Sony CMD-Z5 into a Meshtastic/Lorawan pager



Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
It measures 25 × 25 mm and has 4 copper layers, 1.6 mm thick.
34 parts, built around the ADP1231 and DMG1024UV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the compressedfish/SAFMC-2025-catE-dev repository on GitHub, at the commit this page was made from: the board is pcb/cameraadapter/cameraadapt.kicad_pcb and its schematic pcb/cameraadapter/cameraadapt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).