4 layers71.5 × 115.4 mm
ADP1231
PanasonicExtended
- Part id
- panasonic/ADP1231
- Category
- Pressure Sensors
- Package
- DIP-6
- Pins
- 5
- In stock
- 0 at JLCPCB (C6119294)
- Used on
- 3 open-source boards
Overview
The ADP1231 is a pressure Sensor made by Panasonic in a DIP-6 package with 5 pins.
PCBKit's library has its footprint (Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C6119294). 3 open-source boards in 3 repositories on GitHub use it.
Symbol
The library has no symbol for this part yet.
Footprint
Open-source boards using it
3- 4 layers25 × 25 mm
Cameraadapt
compressedfish/SAFMC-2025-catE-dev
meowmeowmeowmeowmeowmrowmeowmeowmeowmrowmeowmraaaaaaaaaaaaaaaaaaaaaaaaaa
34 partsMIT - 4 layers227 × 50 mm
Parts like it
8
WF100DPZ 0.4BG D6B DT
DIP-6-40℃~+100℃ 0.3hpa 1.8V~3.6V 300nA 4hpa I2C、SPI No DIP-6 Pressure Sensors ROHSWFPressure SensorsGZP160-040DR
DIP-6-30℃~+100℃ 0Kpa~40Kpa 5V No DIP-6 Pressure Sensors ROHSSencoch SemiconductorPressure SensorsWF100DPZ 1BG D6 DT
DIP-6-40℃~+100℃ 0.3hpa 1.8V~3.6V 300nA 4hpa I2C、SPI No DIP-6 Pressure Sensors ROHSWFPressure SensorsWF100SPZ 2BG D6 AT
DIP-6-40℃~+125℃ 5V DIP-6 Pressure Sensors ROHSWFPressure SensorsHBP1201D040GBD6-4
DIP-6-20℃~+85℃ 1uA 2.7V~5.5V I2C Negative pressure/vacuum measurement、On-chip temperature compensation、Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes DIP-6 Pressure Sensors ROHSHAOBANG HI-TECHPressure SensorsHBP1201D040GND6-4
DIP-6-20℃~+85℃ 1uA 2.7V~5.5V I2C Negative pressure/vacuum measurement、On-chip temperature compensation、Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes DIP-6 Pressure Sensors ROHSHAOBANG HI-TECHPressure SensorsHBP1201D040GPD6-4
DIP-6-20℃~+85℃ 1uA 2.7V~5.5V I2C Negative pressure/vacuum measurement、On-chip temperature compensation、Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes DIP-6 Pressure Sensors ROHSHAOBANG HI-TECHPressure SensorsHBP1201D101GBD6-4
DIP-6-1bar~1bar -20℃~+85℃ 1uA 2.7V~5.5V I2C Negative pressure/vacuum measurement、On-chip temperature compensation、Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes DIP-6 Pressure Sensors ROHSHAOBANG HI-TECHPressure Sensors
Questions
Is there a KiCad symbol and footprint for the ADP1231?
Yes. the footprint Package_DIP:DIP-6_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADP1231?
DIP-6, with 5 pins. Its footprint is drawn on this page.
Where is the ADP1231 datasheet?
Panasonic publishes it: the Datasheet link on this page opens it.
Where can I order the ADP1231?
JLCPCB lists it as part C6119294, with 0 in stock; the sellers' links on this page open their listings.
What can replace the ADP1231?
Parts like it in the library: the WF100DPZ 0.4BG D6B DT by WF, the GZP160-040DR by Sencoch Semiconductor, the WF100DPZ 1BG D6 DT by WF and the WF100SPZ 2BG D6 AT by WF. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ADP1231?
3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.