2 layers75 × 140 mm
4 layers59.9 × 50.4 mm
ECEN4013Project2
collinthornton/ECEN4013Project2- Size
- 59.9 × 50.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 103
- Pads
- 298
- Tracks, vias
- 694, 132
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Oct 2021
- Updated
- 9 Dec 2021
Overview
ECEN4013Project2 is an open-source printed circuit board by collinthornton, from the collinthornton/ECEN4013Project2 repository on GitHub. It is a 4-layer board of 59.9 × 50.4 mm with 64 parts on 103 nets, routed with 694 tracks and 132 vias.
It is built around the ME6211A28M3G-N, MPU-6050 and USBLC6-2SC6. Its parts include 18 capacitors, 15 resistors, 9 ICs, 7 diodes and 4 connectors. It belongs with the STM32 boards of this library.
Main components
3
ME6211A28M3G-N
SOT-23-40℃~+150℃@(Ta) 1 2.8V 220mV@(200mA) 30uA 500mA 50uVrms 6V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdECEN4013Project2
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C7, C9, C10, C11, C12, C13, C14 |
| 4 | 10 | Resistor_SMD:R_0603_1608Metric | R5, R7, R10, R12 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 2 | 100 @ 100 MHz | Diode_SMD:D_0805_2012Metric | FB1, FB2 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R15 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C5, C16 |
| 2 | 14pF | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 34 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | 0.4 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 2.2n | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 24MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | HSE1 |
| 1 | 27nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 50 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 5k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | ATGM336H-1N | RF_GPS:ublox_MAX | U6 |
| 1 | BATT_STAT | custom:APHF1608LSEEQBDZGKC | D5 |
| 1 | BLE_CON | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | CHARGE_LED_R | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J5 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J4 |
| 1 | DS-32-BLE4.2 | custom:DL-32-BLE4.2 | U4 |
| 1 | D_Schottky | Diode_SMD:D_SOD-323 | D1 |
| 1 | GPS_STATUS | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | JST_BATT | Connector_JST:JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical | J2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ME6211A28M3G-N | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | MLX90393 | Package_DFN_QFN:QFN-16-1EP_5x5mm_P0.8mm_EP2.7x2.7mm | U9 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U7 |
| 1 | Micro_SD_TF-15 | custom:MICRO_SD_TF-15 | U8 |
| 1 | ON_OFF | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | PWR_PMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SD_ACT | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | STM32L151C8TxA | Package_QFP:LQFP-48_7x7mm_P0.5mm | U5 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_ACT | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | USB_OTG | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
More from collinthornton/ECEN4013Project2
1Similar boards
- 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 2 layers50 × 66 mm
- 4 layers132.5 × 105 mm
HEXCORE PCB Design v0
JoshCrouch/HEXCORE
HEXCORE is a Hexapod-type robot that includes both a custom remote as well as vision system making use of 2.4GHz RF and WiFi respectively.
160 parts3 - 2 layers47.9 × 28.5 mm
Posture tracker v2
kiranj26/Posture-Tracker-Using-ESP32
Posture Correction using ESP32-MINI-1 and MU sensor (GY-521 / MPU-6050)
52 parts3MIT - 4 layers67.5 × 53.5 mm
Flight controller rev2
shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.
65 parts3MIT - 4 layers62.2 × 54.6 mm
Flight ControllerV1.0
alihaanc/SKYKILLER-Development-Board
Drone and Rocket Development PCB board
59 parts2 - 2 layers45.4 × 36 mm
STM32 Vibrations Monitor
AnooshZ/VibrationMonitor-MPU6050
Arduino + MPU6050 vibration monitoring system with threshold detection, Python live plotting, and KiCad PCB design.
44 parts2MIT - 4 layers100 × 70 mm
Controller
Eryk-Mozdzen/hogger2
Hemispherical Omnidirectional Gimbaled (HOG) wheel - this robot have two of them
208 parts2
Questions
How big is the ECEN4013Project2 PCB?
It measures 59.9 × 50.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ECEN4013Project2 use?
64 parts, built around the ME6211A28M3G-N, MPU-6050 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ECEN4013Project2 KiCad files?
From the collinthornton/ECEN4013Project2 repository on GitHub, at the commit this page was made from: the board is KiCAD/Board/Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ECEN4013Project2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask collinthornton before reusing the design.