2 layers50.8 × 25.4 mm
Ckt irsense split
IowaScaledEngineering/ckt-irsense
CKT-IRSENSE Reflective Infrared Proximity Sensor
26 parts1
2 layers50 × 50 mm
PIC32
Cole-Abbott/ME433Repo for ME 433, Cole Abbott
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 33
- Pads
- 100
- Tracks, vias
- 170, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Mar 2023
- Updated
- 10 Jun 2023
Overview
PIC32 is an open-source printed circuit board by Cole-Abbott, from the Cole-Abbott/ME433 repository on GitHub. It is a 2-layer board of 50 × 50 mm with 23 parts on 33 nets, routed with 170 tracks and 13 vias.
It is built around the CP2102 and AP7381-33Y. Its parts include 6 capacitors, 4 resistors, 4 connectors, 3 diodes and 3 switches. It belongs with the PIC boards of this library.
Main components
2
CP2102
-Non-isolated TYPE-A UART(TTL) USB2.0 - USB Conversion Modules ROHSAi-ThinkerUSB Conversion Modules
AP7381-33Y
SOT-89-40℃~+125℃@(Tj) 1 150mA 1V@(100mA) 2.5uA 3.3V 40V 60dB Fixed Positive Short Circuit Protection、Thermal Shutdown SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdME433
Repo for ME 433, Cole Abbott
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1uF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3, C5 |
| 2 | 0.1uF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C4, C6 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 1 | AP7381 | Package_TO_SOT_THT:TO-92L_Inline | U2 |
| 1 | Battery | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | CP2102 | ME433:AdaFruit Friend | J4 |
| 1 | GREEN | LED_THT:LED_D3.0mm | D1 |
| 1 | LEFT | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J2 |
| 1 | MCLR | ME433:SW_PUSH | SW2 |
| 1 | PWR | ME433:SlideSwitch | SW1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 330 |
| 1 | RED | LED_THT:LED_D3.0mm | D2 |
| 1 | RIGHT | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J3 |
| 1 | USER | ME433:SW_PUSH | SW3 |
| 1 | YELLOW | LED_THT:LED_D3.0mm | D3 |
| 1 | ~ | Package_DIP:DIP-28_W7.62mm_Socket | PIC32MX170f256b |
Similar boards
- 2 layers38 × 100 mm
Nylok Heater
boydportfolio/Nylok-Heater
Two-mode handheld induction-heater controller with KiCad design files, product design rendering, engineering calculations, and full cost analysis.
68 parts - 2 layers50.8 × 25.4 mm
- 2 layers127 × 76.2 mm
- 2 layers88.9 × 215.9 mm
Mss crossover array
IowaScaledEngineering/mss-crossover
Integrated Crossover Module for Free-mo Modular Signal System
291 parts - 2 layers50 × 50 mm
HW4 1
sirojc/me433-advanced-mechatronics
ME433 Advanced Mechatronics Spring 2023 @ Northwestern University
23 parts - 2 layers76.3 × 12 mm
- 2 layers32 × 32 mm
Usb pdmon
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
42 parts14Apache-2.0
Questions
How big is the PIC32 PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PIC32 use?
23 parts, built around the CP2102 and AP7381-33Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIC32 KiCad files?
From the Cole-Abbott/ME433 repository on GitHub, at the commit this page was made from: the board is HW4/PIC32/PIC32.kicad_pcb and its schematic HW4/PIC32/PIC32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIC32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Cole-Abbott before reusing the design.