
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Transceptor. Esquematico y PCB. Trabajo Practico Grupal de Introduccion a la Ingerenieria Electronica. Facultad de ingenieria. UBA
TPG IIE is an open-source printed circuit board by Coko33, from the Coko33/TPG_IIE repository on GitHub. It is a 2-layer board of 119 × 107 mm with 40 parts on 50 nets, routed with 187 tracks and 0 vias.
It is built around the LM324. Its parts include 6 capacitors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 1R1, 1R2, 2R1, 2R2, 2R3, 2R4, 2R5, 2R6, 2R7, 2R8, 2R9, 2R10, 2R11, 2RA1, 2RA2, 3R1 +6 |
| 5 | C_Polarized_US | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C3, C4, C5, C6 |
| 3 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3 |
| 2 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2, JP3 |
| 1 | Arduino_UNO_R2 | Module:Arduino_UNO_R2 | A1 |
| 1 | C | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C2 |
| 1 | Jack1 | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 1 | Jumper_3_Open | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LM324 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1 |
| 1 | Microphone | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | MIC1 |
| 1 | V | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | VCC1 |
| 1 | VSOURCE | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | VGEN1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!




corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support

schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers
It measures 119 × 107 mm and has 2 copper layers, 1.6 mm thick.
40 parts, built around the LM324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Coko33/TPG_IIE repository on GitHub, at the commit this page was made from: the board is TPG_IIE.kicad_pcb and its schematic TPG_IIE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Coko33 before reusing the design.