2 layers96.6 × 82.8 mm
2 layers115.8 × 89.4 mm
Starbie PCB Board File
Coderbest123/Starbie-PCB-My starbie PCB project
- Size
- 115.8 × 89.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 25
- Pads
- 60
- Tracks, vias
- 77, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Oct 2026
- Updated
- 27 Oct 2026
Overview
Starbie PCB Board File is an open-source printed circuit board by Coderbest123, from the Coderbest123/Starbie-PCB- repository on GitHub. It is a 2-layer board of 115.8 × 89.4 mm with 9 parts on 25 nets, routed with 77 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdStarbie-PCB-
My starbie PCB project
This is a PCB board with 2 keys a screen and temp and movement sensors. I made this for half life and to try to learn about how to make PCB boards. This board works by have buttons and sensors that report information to the processer and then that information is rendered and shown on the screen.
Here is an image of the schematic layout with the processer, sensors, buttons and screen.
This is the image of the finished PCB board layout.
This is another image of the PCB board layout just the 3d view with the decorations.
| Part Name | Cost | Quantity | Vendor |
|---|---|---|---|
| Display 128x64_0.96_I2C | $1.09 | 1 | AliExpress |
| Connector_PinSocket_1.00mm:PinSocket_1x03_P1.00mm_Vertical | 1.62+10.24 shipping with resistor and keys | 1 | DigiKey |
| Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | $0.04 | 1 | DigiKey |
| Button_Switch_Keyboard:SW_Cherry_MX_1.00u_1PCB | $3.50 | 2 | DigiKey |
| XIAO-ESP32-C3-SMD | $11.68 | 1 | seeed studio |
| DHT11 | $1.21 | 1 | temu |
| Total | $23.59 | 7 |
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_1.00mm:PinSocket_1x08_P1.00mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C6-DIP | U1 |
Questions
How big is the Starbie PCB Board File PCB?
It measures 115.8 × 89.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starbie PCB Board File use?
9 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starbie PCB Board File KiCad files?
From the Coderbest123/Starbie-PCB- repository on GitHub, at the commit this page was made from: the board is Starbie PCB Board File.kicad_pcb and its schematic Starbie PCB Schematic FIle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starbie PCB Board File design in my own project?
Its repository states no licence, so its author keeps all rights: ask Coderbest123 before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5