2 layers90.2 × 99.1 mm
Control logic
codemonkey76/DIY-8-Bit-Computer
DIY 8-Bit Computer, based on the design by Ben Eater
94 parts
2 layers78.7 × 58.4 mm
Register b
codemonkey76/DIY-8-Bit-ComputerDIY 8-Bit Computer, based on the design by Ben Eater
- Size
- 78.7 × 58.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 29
- Pads
- 134
- Tracks, vias
- 538, 51
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Aug 2019
- Updated
- 25 Aug 2019
Overview
Register b is an open-source printed circuit board by codemonkey76, from the codemonkey76/DIY-8-Bit-Computer repository on GitHub. It is a 2-layer board of 78.7 × 58.4 mm with 50 parts on 29 nets, routed with 538 tracks and 51 vias.
It is built around the 74LS245SC, 74LS173SC and B0, with the B1, B2 and B4 among its other parts. Its parts include 8 resistors, 8 diodes, 4 connectors, 3 ICs and 1 capacitor. It belongs with the retro computing and games boards of this library.
Main components
874LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS173SC
CDIP-160℃~+70℃ 10ns 10ns 28mA 30MHz 4 4.75V~5.25V 40ns@5V,15pF 74LS Series Asynchronous D-Type Reset Rising Edge Tri-State CDIP-16 Flip FlopsTexas InstrumentsFlip Flops
B0
插件,D2.5xL9mmThermal Fuses (TCO)SETsafe | SETfuse
B1
插件,D3xL10mmThermal Fuses (TCO)SETsafe | SETfuseB2
插件,D3xL10mmThermal Fuses (TCO)SETsafe | SETfuseB4
插件,D2.5xL9mmThermal Fuses (TCO)SETsafe | SETfuse
B6
插件,D2.5xL9mmThermal Fuses (TCO)SETsafe | SETfuseB7
插件,D3xL10mmThermal Fuses (TCO)SETsafe | SETfuse
README
README.mdDIY-8-Bit-Computer
Based off schematics and design of breadboard computer by Ben Eater, available in kit form at: https://eater.net/8bit/kits
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 220R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 2 | 74LS173 | Package_DIP:DIP-16_W7.62mm_Socket | U2, U3 |
| 1 | +5V | TestPoint:TestPoint_Pad_1.5x1.5mm | TP21 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm_Socket | U1 |
| 1 | Address | Connector_JST:JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal | J2 |
| 1 | BUS_0 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP8 |
| 1 | BUS_1 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP7 |
| 1 | BUS_2 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6 |
| 1 | BUS_3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5 |
| 1 | BUS_4 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | BUS_5 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | BUS_6 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | BUS_7 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | B_0 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP16 |
| 1 | B_1 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP15 |
| 1 | B_2 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP14 |
| 1 | B_3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP13 |
| 1 | B_4 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP12 |
| 1 | B_5 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP11 |
| 1 | B_6 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP10 |
| 1 | B_7 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP9 |
| 1 | Bus | Connector_JST:JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal | J1 |
| 1 | CLK | TestPoint:TestPoint_Pad_1.5x1.5mm | TP18 |
| 1 | CLR | TestPoint:TestPoint_Pad_1.5x1.5mm | TP19 |
| 1 | Conn_01x04_Male | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J3 |
| 1 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP22 |
| 1 | Power | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | ~BI~ | TestPoint:TestPoint_Pad_1.5x1.5mm | TP17 |
| 1 | ~BO~ | TestPoint:TestPoint_Pad_1.5x1.5mm | TP20 |
The 46 most common of 50 parts.
Questions
How big is the Register b PCB?
It measures 78.7 × 58.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Register b use?
50 parts, built around the 74LS245SC, 74LS173SC, B0 and B1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Register b KiCad files?
From the codemonkey76/DIY-8-Bit-Computer repository on GitHub, at the commit this page was made from: the board is Register B/register-b.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Register b design in my own project?
Its repository states no licence, so its author keeps all rights: ask codemonkey76 before reusing the design.
More from codemonkey76/DIY-8-Bit-Computer
10- 2 layers90.2 × 88.9 mm
- 2 layers95.3 × 81.3 mm
- 2 layers78.7 × 58.4 mm
Register a
codemonkey76/DIY-8-Bit-Computer
DIY 8-Bit Computer, based on the design by Ben Eater
50 parts - 2 layers78.7 × 58.4 mm
Instruction register
codemonkey76/DIY-8-Bit-Computer
DIY 8-Bit Computer, based on the design by Ben Eater
46 parts - 2 layers72.4 × 63.5 mm
- 2 layers72.4 × 50.8 mm
Address register
codemonkey76/DIY-8-Bit-Computer
DIY 8-Bit Computer, based on the design by Ben Eater
39 parts - 2 layers72.4 × 74.9 mm
Output register
codemonkey76/DIY-8-Bit-Computer
DIY 8-Bit Computer, based on the design by Ben Eater
35 parts - 2 layers63.5 × 45.7 mm
Program counter
codemonkey76/DIY-8-Bit-Computer
DIY 8-Bit Computer, based on the design by Ben Eater
29 parts - 2 layers80 × 93.2 mm
Similar boards
- 2 layers300 × 300 mm
SAP Extended
cyrillvalentini/SAP-Extended
Extended Simple-As-Possible Computer based on Ben Eaters video series
440 parts1 - 2 layers100 × 99.9 mm
- 2 layers
- 2 layers67.8 × 55 mm
- 2 layers370.8 × 298.5 mm
8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers
- 2 layers100 × 100 mm
- 2 layers624.6 × 303.9 mm
SPU2
rraider/Seminarkurs2021
Entwicklung eines turingvollständigen, primitiven Microcontroller in der Software Digital
736 parts7MIT