2 layers100 × 92.6 mm
Adaptador db15 usb
cnpem-emi/receiver485
Receiver circuit for RS485 communication - Feed Forward
12 parts
2 layers69.2 × 100 mm
ReceiverRS485
cnpem-emi/receiver485Receiver circuit for RS485 communication - Feed Forward
- Size
- 69.2 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 111
- Pads
- 356
- Tracks, vias
- 1,130, 62
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jun 2021
- Updated
- 14 Dec 2021
Overview
ReceiverRS485 is an open-source printed circuit board by cnpem-emi, from the cnpem-emi/receiver485 repository on GitHub. It is a 2-layer board of 69.2 × 100 mm with 93 parts on 111 nets, routed with 1,130 tracks and 62 vias.
It is built around the RFM-0505S and TLP2372(V4,E. Its parts include 24 resistors, 24 ICs, 10 connectors, 8 capacitors and 4 fuses. It belongs with the interfaces and adapters boards of this library.
Main components
2Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R4, R6, R8, R10, R12, R14, R16, R18, R20, R22, R24 |
| 12 | TLP2372 | Package_SO:MFSOP6-5_4.4x3.6mm_P1.27mm | U3, U5, U6, U9, U11, U12, U15, U17, U18, U21, U23, U24 |
| 8 | 10u | Capacitor_SMD:C_1210_3225Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | 120 | Resistor_SMD:R_0805_2012Metric | R3, R5, R9, R11, R15, R17, R21, R23 |
| 8 | MAX3283E | Package_TO_SOT_SMD:SOT-23-6 | U2, U4, U8, U10, U14, U16, U20, U22 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric | R1, R7, R13, R19 |
| 4 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2, J4, J6, J8 |
| 4 | Protc | Fuse:Fuse_1206_3216Metric | F1, F2, F3, F4 |
| 4 | RFM-0505S | footprints:RFM-0505S | U1, U7, U13, U19 |
| 4 | USB3_A | Connector_PinSocket_1.27mm:PinSocket_1x10_P1.27mm_Vertical | J1, J3, J5, J7 |
| 2 | USB3_duplo | kl25_xx:USB3_DUPLO | J9, J10 |
| 1 | SPIxxCON_v2 | Controle:SPIxxCON_(only_connector) | B1 |
| 1 | ch1_5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP15 |
| 1 | ch1_5_g5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | ch1_ch2_5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP9 |
| 1 | ch1_ch2_gnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP12 |
| 1 | ch1_gnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP19 |
| 1 | ch1_gnd_ggnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | ch2_5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP16 |
| 1 | ch2_5_g5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | ch2_ch3_5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP10 |
| 1 | ch2_ch3_gnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP13 |
| 1 | ch2_gnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP20 |
| 1 | ch2_gnd_ggnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | ch3_5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP17 |
| 1 | ch3_5_g5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | ch3_ch4_5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP11 |
| 1 | ch3_ch4_gnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP14 |
| 1 | ch3_gnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP21 |
| 1 | ch3_gnd_ggnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP7 |
| 1 | ch4_5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP18 |
| 1 | ch4_5_g5 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | ch4_gnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP22 |
| 1 | ch4_gnd_ggnd | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8 |
More from cnpem-emi/receiver485
1Similar boards
- 6 layers150 × 100 mm
- 2 layers100 × 100 mm
Pico dram tester
schlae/pico-dram-tester
Raspberry Pi Pico 2 Vintage DRAM Tester
47 parts165CC-BY-SA-4.0 - 4 layers80 × 100 mm
- 4 layers100 × 50 mm
Psu ext
PSU-Ext-Org/psu-ext-hardware
A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.
137 parts9CERN-OHL-S-2.0 - 4 layers165 × 50 mm
- 2 layers127 × 100.3 mm
Cross point exp brd mini red2-sjmp
damercer/Cross-Point-Project
A Software Configurable Solderless Breadboard
130 parts3 - 2 layers59.4 × 32.3 mm
- 6 layers170 × 172.2 mm
Esc rev b
iamdarshg/drone-arm
Reworked cheaper, maybe faster but less redundant drone controller.
681 parts2
Questions
How big is the ReceiverRS485 PCB?
It measures 69.2 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ReceiverRS485 use?
93 parts, built around the RFM-0505S and TLP2372(V4,E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ReceiverRS485 KiCad files?
From the cnpem-emi/receiver485 repository on GitHub, at the commit this page was made from: the board is receiver_485/ReceiverRS485.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ReceiverRS485 design in my own project?
Its repository states no licence, so its author keeps all rights: ask cnpem-emi before reusing the design.