
Smart Tripod
henry-thomas-1/ECE-445-Smart-Tripod
The above files are set as Handheld, however they are the files for the motorized tripod. Backups are included of the files over minor changes and major changes to the PCB.

GS E22-900M30S is an open-source printed circuit board by cmu-argus-2, from the cmu-argus-2/Comms-GS-board repository on GitHub. It is a 2-layer board of 65 × 56 mm with 18 parts on 38 nets, routed with 81 tracks and 52 vias.
It is built around the E22-900M30S and MIC29300-5.0WU-TR. Its parts include 5 connectors, 4 capacitors, 2 resistors, 2 ICs and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3, H4 |
| 2 | 10uF | tantulum capacitor:TAJC_AVX | C1, C2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | E22-900M30S | E22-900M30S:XCVR_E22-900M30S | U2 |
| 1 | GND | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | J4 |
| 1 | MIC29300-5.0WU-TR | MIC29300_5:TO-263-3_MCH | U1 |
| 1 | POW | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | VCC | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | J5 |
| 1 | V_RF | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | J2 |

henry-thomas-1/ECE-445-Smart-Tripod
The above files are set as Handheld, however they are the files for the motorized tripod. Backups are included of the files over minor changes and major changes to the PCB.

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

ndoo/ikoka-nano-meshtastic-device
A Meshtastic device based on the Seeed Studio XIAO nRF52840 and EBYTE E22-XXXMXXS series LoRa modules. Pinout matches the Meshtastic xiaoble variant.


paperclipsvinny/Meshtastic-Injection-Apparatus
MIA - Meshtastic Injection Apparatus Tool for long range Pen testing


zenitheesc/Alcantara
Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.

McMaster-Rocketry-Team/VLF4r2
PCB schematics and layout for Void Lake Fusion 4 Avionics
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the E22-900M30S and MIC29300-5.0WU-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the cmu-argus-2/Comms-GS-board repository on GitHub, at the commit this page was made from: the board is GS_E22-900M30S.kicad_pcb and its schematic GS_E22-900M30S.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask cmu-argus-2 before reusing the design.