4 layers50 × 100 mm
2 layers
Dash Cam Power Regulator
cmasterx/Dash-Cam-Power-Regulator- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 44
- Pads
- 156
- Tracks, vias
- 7, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Feb 2022
- Updated
- 8 May 2022
Overview
Dash Cam Power Regulator is an open-source printed circuit board by cmasterx, from the cmasterx/Dash-Cam-Power-Regulator repository on GitHub. It is a 2-layer board with 46 parts on 44 nets, routed with 7 tracks and 0 vias.
It is built around the S-1318A33-M5T1U4, SSM6J507NU,LF and FZT788BTA, with the PMEG6030EP among its other parts. Its parts include 15 resistors, 13 capacitors, 4 diodes, 4 transistors and 3 ICs. It belongs with the power boards and the STM32 boards of this library.
Main components
4
S-1318A33-M5T1U4
SOT-23-5-40℃~+85℃@(Ta) 1 100mA 3.3V 45mV@(10mA) 5.5V 95nA Fixed Over Current Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSABLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SSM6J507NU,LF
UDFNB-6(2x2)1 P-Channel 1.15nF 1.25W 10A 185pF 2.2V 20.4nC@4.5V 210pF 30V 32mΩ@4V P-Channel UDFNB-6(2x2) MOSFETs ROHSToshibaMOSFETs
FZT788BTA
SOT-223-55℃~+150℃ 1 PNP 100MHz 100nA 150mV 15V 300 3A 3W 7V PNP SOT-223 Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)
PMEG6030EP
SOD-1281 Independent 200uA@60V 3A 50A 530mV@3A 60V SOD-128 Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdDash-Cam-Power-Regulator
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C7, C12, C13 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R9, R11 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C9, C10 |
| 3 | 100k | Resistor_SMD:R_0402_1005Metric | R7, R14, R15 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C8 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 2 | SSM6J507NU | ATL:SSM6J507NU | Q2, Q3 |
| 1 | 0.2R | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100R | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 10R | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 18k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 3.5A | Fuse:Fuseholder_Littelfuse_Nano2_154x | F1 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 50k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | BAT_1 | Connector_AMASS:AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | J1 |
| 1 | BAT_2 | Connector_AMASS:AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | J2 |
| 1 | BQ2057xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | DMP58D0LFB-7 | Package_DFN_QFN:Diodes_DFN1006-3 | Q1 |
| 1 | FZT788B | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q4 |
| 1 | LED_BLUE | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LED_GREEN | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LED_RED_FUSE_FAIL | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | PMEG6030EP | Diode_SMD:D_SOD-128 | D4 |
| 1 | S-1318A33-M5T1U4 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | STM32L011G3Ux | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
Similar boards
- 2 layers12 × 21 mm
- 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 4 layers24 × 44 mm
- 4 layers37.6 × 30.6 mm
Bias generator LT8362
OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging
61 parts44 - 4 layers97 × 97.4 mm
QEdge UI
qinno/qEdge-UI
qedge+ is the industry's low power design alternative to the standard PC approach. qEdge-UI is part of qEdge+ and consists of a RaspBerry Pico with LCD, touch screen and keys and an 868MHz LoRa radio module.
170 parts3 - 2 layers80 × 50 mm
Blitzortung AS3935
patkan/lightning-detector
Lightning Detector ethernet sensor node and server based on AS3935 - this project is discontinued
81 parts1GPL-2.0 - 4 layers86 × 29.9 mm
Geiger probe
bartkepl/CanGeigerProbe
Polowa sonda promieniowania jonizującego z miniaturową lampą Geigera-Müllera, komunikująca się cyfrowo przez CAN 2.0B.
116 partsMIT
Questions
What parts does the Dash Cam Power Regulator use?
46 parts, built around the S-1318A33-M5T1U4, SSM6J507NU,LF, FZT788BTA and PMEG6030EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dash Cam Power Regulator KiCad files?
From the cmasterx/Dash-Cam-Power-Regulator repository on GitHub, at the commit this page was made from: the board is pcb/Dash Cam Power Regulator.kicad_pcb and its schematic pcb/Dash Cam Power Regulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dash Cam Power Regulator design in my own project?
Its repository states no licence, so its author keeps all rights: ask cmasterx before reusing the design.