
Ibm-5151-pcb
asinghani/ibm-5151-controller
Building a VT100 emulator out of an IBM 5151 monitor and an FPGA

Ice40tag is an open-source printed circuit board by clysto, from the clysto/ice40tag repository on GitHub. It is a 4-layer board of 50 × 37 mm with 78 parts on 122 nets, routed with 623 tracks and 104 vias.
It is built around the ICE40UP5K-SG48ITR50, W25Q128JVSIQ and FT2232HQ, with the SIT2001BI-S2-33E-12.000000G, TLV75512PDBV and TLV75533PDBV among its other parts. Its parts include 33 capacitors, 14 resistors, 7 ICs, 4 connectors and 3 diodes. It belongs with the FPGA and CPLD boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100n | Capacitor_SMD:C_0402_1005Metric | C2, C4, C10, C11, C12, C13, C14, C15, C16, C23, C26, C29, C30, C31, C32, C33 +4 |
| 7 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C17, C19, C20, C21 |
| 6 | 33E | Resistor_SMD:R_Array_Convex_4x0402 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R10, R11, R18 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C18, C22, C25 |
| 3 | 2.2k | Resistor_SMD:R_0402_1005Metric | R6, R13, R19 |
| 2 | 10k | Resistor_SMD:R_Array_Convex_4x0402 | RN7, RN8 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C24, C27 |
| 2 | 330E | Resistor_SMD:R_0402_1005Metric | R20, R21 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 600 | Inductor_SMD:L_0402_1005Metric | L1, L2 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP2 |
| 1 | 100E | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C28 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 800mVf | Diode_SMD:D_0603_1608Metric | D1 |
| 1 | 93C46BT-I_OT | Package_TO_SOT_SMD:SOT-23-6 | IC1 |
| 1 | FT2232HQ | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm | U2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | ICE40UP5K-SG48ITR | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | PMOD1A | Custom:PMOD | J2 |
| 1 | PMOD1B | Custom:PMOD | J3 |
| 1 | PMOD2 | Custom:PMOD | J4 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | SIT2001BI-S2-33E-12.000000G | Package_TO_SOT_SMD:SOT-23-5 | IC2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1 |
| 1 | TLV75512PDBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
The 74 most common of 78 parts.

asinghani/ibm-5151-controller
Building a VT100 emulator out of an IBM 5151 monitor and an FPGA

Darkops-cpu/CERBERUS
An open-source iCE40 FPGA development board with a fully open toolchain.



HexFud/OptiLogic-16-Pro
A logic analyzer with 16 channels that can also watch two fiber network links at the same time

embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products


4n3m4i1/PG_Logic
Open Source FPGA Development Boards for Education and Deeply Embedded Applications
It measures 50 × 37 mm and has 4 copper layers, 1.6 mm thick.
78 parts, built around the ICE40UP5K-SG48ITR50, W25Q128JVSIQ, FT2232HQ and SIT2001BI-S2-33E-12.000000G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the clysto/ice40tag repository on GitHub, at the commit this page was made from: the board is ice40tag.kicad_pcb and its schematic ice40tag.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask clysto before reusing the design.