2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600
2 layers206 × 30 mm
Regua PCB FritzenLab
clovisf/Regua-PCB-FritzenLab1Regua 20cm feita em circuito impresso
- Size
- 206 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 10
- Pads
- 37
- Tracks, vias
- 67, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Nov 2024
- Updated
- 14 Jan 2025
Overview
Regua PCB FritzenLab is an open-source printed circuit board by clovisf, from the clovisf/Regua-PCB-FritzenLab repository on GitHub. It is a 2-layer board of 206 × 30 mm with 13 parts on 10 nets, routed with 67 tracks and 14 vias.
It is built around the ATTINY85-20SU. Its parts include 4 resistors, 2 diodes, 1 capacitor, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdRegua-PCB-FritzenLab
Regua 20cm feita em circuito impresso
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | ATtiny85-20S | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Multicomp_BC-2001_1x2032 | BT1 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | LOGO | logo:logo-35mm | G*** |
| 1 | SW_Push_Dual | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0805_2012Metric | TH1 |
Similar boards
- 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28
Questions
How big is the Regua PCB FritzenLab PCB?
It measures 206 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Regua PCB FritzenLab use?
13 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Regua PCB FritzenLab KiCad files?
From the clovisf/Regua-PCB-FritzenLab repository on GitHub, at the commit this page was made from: the board is regua-pcb-fritzenlab.kicad_pcb and its schematic regua-pcb-fritzenlab.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Regua PCB FritzenLab design in my own project?
Its repository states no licence, so its author keeps all rights: ask clovisf before reusing the design.