
8x8
miliar/saiboard
An open-source, wooden electronic Go board that integrates with KataGo.

A simple hall-sensor based phase-angle-control pedal using the RP2040 microcontroller.
Nähmaschine is an open-source printed circuit board by climbingHacker, from the climbingHacker/sewing-machine-pedal repository on GitHub. It is a 2-layer board with 10 parts on 30 nets.
It is built around the AH49E, L7805 and RP2040-ZERO. Its parts include 3 resistors, 3 ICs and 2 diodes. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10K | Package_DIP:DIP-8_W7.62mm | R5 |
| 1 | 20K | Package_DIP:DIP-8_W7.62mm | R2 |
| 1 | 220R | Package_DIP:DIP-8_W7.62mm | R1 |
| 1 | AH49E | Package_TO_SOT_THT:TO-92S | U2 |
| 1 | D_Bridge_+AA- | Diode_THT:Diode_Bridge_Round_D9.8mm | D1 |
| 1 | Generic_Triac_A1A2G | Package_DIP:DIP-8_W7.62mm | D2 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | RP2040-Zero | custom:RP2040-Zero | RZ1 |
| 1 | Transformer_1P_1S | RF_Module:ESP-01 | T1 |

miliar/saiboard
An open-source, wooden electronic Go board that integrates with KataGo.

PippoGot/PRJ_Smart_Servo
Repository containing files for a new servo controller board compatible with MG996R servo motor




beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.


ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
10 parts, built around the AH49E, L7805 and RP2040-ZERO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the climbingHacker/sewing-machine-pedal repository on GitHub, at the commit this page was made from: the board is Nähmaschine.kicad_pcb and its schematic Nähmaschine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask climbingHacker before reusing the design.