
Charge Seed Breakout
clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.
Potentiometer is an open-source printed circuit board by clectric-diy, from the clectric-diy/Charge repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 15 × 20 mm with 4 parts on 3 nets, routed with 10 tracks and 0 vias.
It is built around the RK09K1130D62. Its parts include 1 resistor and 1 connector. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
KiCad source files for the 3.3V RGB LED breakout board.
LED_RGB-3.3V.kicad_sch: schematic (title block: "Charge 3.3V RGB LED").LED_RGB-3.3V.kicad_pcb: PCB layout.LED_RGB-3.3V.kicad_pro: project configuration.LED_RGB-3.3V.kicad_prl: local project state.| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LOGO | clectric-diy-branding:clectric.diy-Wordmark-5mm | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | RK09K1130D62 | clectric-diy:RES-TH_RK09K113004U | R1 |

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Charge
A collection of breakout boards and breadboard accessories to charge the Synth DIY projects on your workbench.

clectric-diy/Spark-AE
Spark-AE is a synth module designed for the AE Modular format. It is based on the Daisy Seed embedded DSP platform.

joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 15 × 20 mm and has 2 copper layers, 1.6 mm thick.
4 parts, built around the RK09K1130D62. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the clectric-diy/Charge repository on GitHub, at the commit this page was made from: the board is BreakoutBoards/Potentiometer/KiCad/Potentiometer.kicad_pcb and its schematic BreakoutBoards/ATMega4809/KiCad/ATMega4809.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).