2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0
2 layers39.6 × 59.9 mm
Lower v3
ClearGauntlets/ClearGauntlet-PCBPCB - Schematics Design for VR Gloves
- Size
- 39.6 × 59.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 31
- Pads
- 95
- Tracks, vias
- 140, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Oct 2022
- Updated
- 1 May 2023
Overview
Lower v3 is an open-source printed circuit board by ClearGauntlets, from the ClearGauntlets/ClearGauntlet-PCB repository on GitHub. It is a 2-layer board of 39.6 × 59.9 mm with 21 parts on 31 nets, routed with 140 tracks and 4 vias.
Its parts include 17 connectors, 1 capacitor, 1 resistor and 1 IC. It belongs with the ESP32 boards of this library.
README
README.mdClearGauntlet-PCB
PCB - Schematics Design for VR Gloves
A breakout board for ClearGauntlets, aimed at improving cable management and minifying electronics of VR Gloves.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | Conn_01x08_Male | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J19 |
| 1 | ESP32-DEVKIT-V1 | ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | LOGO | cg_logo_small:cg_logo_med | G*** |
| 1 | PIN_INDEX | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | PIN_INDEX_MOTOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | PIN_INDEX_SPLAY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | PIN_MIDDLE | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | PIN_MIDDLE_MOTOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | PIN_MIDDLE_SPLAY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | PIN_PINKY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | PIN_PINKY_MOTOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | PIN_PINKY_SPLAY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | PIN_RING | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | PIN_RING_MOTOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | PIN_RING_SPLAY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | PIN_THUMB | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | PIN_THUMB_MOTOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | PIN_THUMB_SPLAY | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J16 |
| 1 | POWER | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | R_US | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Questions
How big is the Lower v3 PCB?
It measures 39.6 × 59.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lower v3 use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lower v3 KiCad files?
From the ClearGauntlets/ClearGauntlet-PCB repository on GitHub, at the commit this page was made from: the board is board/lower_v3.kicad_pcb and its schematic board/lower_v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lower v3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ClearGauntlets before reusing the design.
Similar boards
- 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
