
Voron Klipper Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

An 8 step dual channel sequencer with voltage controlled step pattern, based on the Fonitronik VCPS8
ADCequencer is an open-source printed circuit board by clarionut, from the clarionut/ADCequencer repository on GitHub. It is a 2-layer board of 146.1 × 84.5 mm with 166 parts on 162 nets, routed with 983 tracks and 42 vias.
It is built around the BAT43. Its parts include 75 resistors, 26 capacitors, 18 diodes, 16 connectors and 12 ICs.
An 8 step dual channel sequencer with voltage controlled step pattern, based on the Fonitronik VCPS8 (the predecessor of the MH11) but with significant modifications.
Most obviously, there are two potentiometers to set CV voltages for each step and two CV output channels. This gives considerable flexibility - e.g. controlling two VCOs, a VCO and filter cutoff, or (in conjunction with an external clock divider / analogue switch module) operation as a 16-step sequencer.
Another significant visible change is the addition of a 'freeze' circuit operated by switch or a gate input allowing the ADC to be stopped under voltage control. This gives real value to the gate output from the VCPS8 (which is on continously through a sequence of active steps) as it allows the sequencer pattern to be updated only when the trigger output is low (generally meaning that no note is sounding). This avoids a serious glitchy effect when a step is turned off while it's active.
Cosmetically, the LED arrays have been replaced by red/white common-cathode bicolour LEDs associated with each step (red shows the active steps and white the current step) plus a red/blue common-anode LED as an indicator for out-of-range pattern control voltages.
Behind the scenes there are also significant changes:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100n | CGE_footprints:C_Disc_D4.3mm_W1.9mm_P5.00mm | C5, C6, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C105 +1 |
| 17 | 10k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R18, R20, R22, R24, R26, R28, R30, R32, R38, R40, R44, R45, R51, R101, R106 +1 |
| 15 | 100k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3, R4, R5, R47, R50, R52, R53, R58, R59, R60, R103, R158, R159, R160 |
| 8 | 18k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R62, R63, R64, R65, R66, R67, R68, R69 |
| 8 | 1N914 | CGE_footprints:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D24, D25, D26, D27, D28, D29, D30, D31 |
| 8 | 1N914 | CGE_footprints:D_DO-35_SOD27_P7.62mm_Horizontal | D13, D14, D16, D18, D19, D20, D21, D22 |
| 8 | 20k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R19, R21, R23, R25, R27, R29, R31, R35 |
| 8 | 6k8 | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10, R11, R12, R13, R14, R15, R16, R17 |
| 7 | 2N3904 | Package_TO_SOT_THT:TO-92_HandSolder | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 4 | 47k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R39, R41, R42, R43 |
| 4 | Hole_3.2mm | MountingHole:MountingHole_3.2mm_M3 | REF1, REF2, REF3, REF4 |
| 4 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U2, U8, U9, U10 |
| 3 | 100k | Resistor_THT:R_Array_SIP9 | RN1, RN2, RN3 |
| 3 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3 |
| 3 | 1k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7, R48, R73 |
| 3 | 39k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R33, R71, Re |
| 3 | FB | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1 | FB1, FB2, FB3 |
| 2 | 4016 | Package_DIP:DIP-14_W7.62mm_Socket | U11, U12 |
| 2 | 4030 | Package_DIP:DIP-14_W7.62mm_Socket | U13, U14 |
| 2 | 470R | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R61, R161 |
| 2 | 51k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R36, R37 |
| 2 | BAT43 | CGE_footprints:D_DO-35_SOD27_P7.62mm_Horizontal | D15, D17 |
| 1 | 100n | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C110 |
| 1 | 10n | CGE_footprints:C_Disc_D4.3mm_W1.9mm_P5.00mm | C27 |
| 1 | 10u | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P5.00mm | C8 |
| 1 | 12k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R104 |
| 1 | 150p | CGE_footprints:C_Disc_D4.3mm_W1.9mm_P5.00mm | C13 |
| 1 | 18k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R34 |
| 1 | 1n | CGE_footprints:C_Disc_D4.3mm_W1.9mm_P5.00mm | C104 |
| 1 | 1u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C7 |
| 1 | 22k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R102 |
| 1 | 27k | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R105 |
| 1 | 2M2 | CGE_footprints:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | 4017 | Package_DIP:DIP-16_W7.62mm_Socket | U6 |
| 1 | 4081 | Package_DIP:DIP-14_W7.62mm_Socket | U7 |
| 1 | 50k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | ADC0802 | Package_DIP:DIP-20_W7.62mm_Socket | U3 |
| 1 | BIN_TO_SW | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J26 |
| 1 | CLK/RST | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | CV IN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J19 |
| 1 | CV OUT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J18 |
| 1 | FREEZE | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J21 |
| 1 | FROM_SW | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J28 |
| 1 | GATE/TRG | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J15 |
| 1 | GRAY_TO_SW | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J27 |
| 1 | L78L09_TO92 | Package_TO_SOT_THT:TO-92_HandSolder | U1 |
| 1 | LOGO | CGE_footprints:CGE_logo | G*** |
| 1 | OORLED | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J25 |
| 1 | PCVOUT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J20 |
| 1 | PLEDS | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J29 |
| 1 | POWER | CGE_footprints:Power_2x06 | J8 |
| 1 | STEP_LEDS | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | TO_POTS | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J6 |
| 1 | WIPERS A | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J16 |
| 1 | WIPERS B | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J17 |

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group



ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers

Testbild-synth/HAGIWO_arduino_oscillator
4HP through hole version of the HAGIWO FM/additive/chord oscillator with mode switch and gain input.

Testbild-synth/Hagiwo_009_030_sequencer
A through-hole PCB conversion of HAGIWO's 6 channel eurorack gate sequencer. Includes Gerbers, Code and building instructions.

bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino

Testbild-synth/HAGIWO-029-033-Eurorack-quantizer
Through hole PCB version of the HAGIWO Dual Quantizer/SH101 Sequencer Eurorack Module-.
It measures 146.1 × 84.5 mm and has 2 copper layers, 1.6 mm thick.
166 parts, built around the BAT43. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the clarionut/ADCequencer repository on GitHub, at the commit this page was made from: the board is ADCequencer/ADCequencer.kicad_pcb and its schematic ADCequencer/ADCcircuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask clarionut before reusing the design.