4 layers137 × 86 mm
2 layers88.9 × 80 mm
Hardware de la CIAA
- Size
- 88.9 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 150
- Pads
- 462
- Tracks, vias
- 1,298, 110
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Apr 2014
- Updated
- 18 Sep 2021
Overview
Edk is an open-source printed circuit board by ciaa, from the ciaa/Hardware repository on GitHub. It is a 2-layer board of 88.9 × 80 mm with 87 parts on 150 nets, routed with 1,298 tracks and 110 vias.
It is built around the FT232RQ, TXB0108PW and PRTR5V0U2X, with the MIC2039EYM-TR, PMEG3020EJ and MMZ1608B601C among its other parts. Its parts include 21 capacitors, 18 resistors, 12 ICs, 8 connectors and 5 diodes.
Main components
10
FT232RQ
PQFN32USB to serial UART InterfaceFTDIUncategorised
TXB0108PW
TSSOP-20-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 8 Automatic direction detection、Power-off protection、Output enable high-impedance Bidirectional Level translator Tri-State TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)MIC2039EYM-TR
UDFN-6-EP(2x2)UDFN-6-EP(2x2) Power Management - Specialized ROHSMicrochip TechnologyPower Management - Specialized
PMEG3020EJ
SOD-323F1 Independent 1mA@30V 2A 30V 620mV@2A 9A SOD-323F Schottky Diodes ROHSNexperiaSchottky Diodes
MMZ1608B601C
0603SMT Chip Bead for Signal LineTDKUncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
BZT52C5V6
SOD-123Zener Diodeshongjiacheng
ZX62-AB-5PA(31)
SMD-30℃~+85℃ 1 1A 30V 5P Female Gray Mini-AB Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSHirose ElectricUSB Connectors
ZX62-B-5PA
UncategorisedUnknown maker
README
PCB/PIC/README.mdCIAA-Microchip
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | SMD_Packages:SMD-0603_c | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C13, C14, C15, C16, C17, C18 +1 |
| 8 | 4.7k | SMD_Packages:SMD-0603_r | R6, R7, R8, R9, R10, R11, R12, R13 |
| 5 | 10k | SMD_Packages:SMD-0603_r | R1, R3, R4, R14, R18 |
| 5 | TXB0108 | Housings_SSOP:SSOP-20_4.4x6.5mm_Pitch0.65mm | U1, U3, U4, U5, U10 |
| 4 | GS3 | Connect:GS3 | GS1, GS2, GS3, GS4 |
| 4 | Mounting hole | Mounting_Holes:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 10uF | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_HandSoldering | C19, C20, C21 |
| 3 | PMEG3020EJ | sod323:SOD323 | D2, D3, D4 |
| 2 | 220 | SMD_Packages:SMD-0603_r | R2, R5 |
| 2 | BLM18KG221SN1D | SMD_Packages:SMD-0603 | FB1, FB3 |
| 2 | BSS138DP | ref_packages:-SOT363_PHILIPS | Q2, Q3 |
| 2 | I/O | Pin_Headers:Pin_Header_Straight_2x10 | P1, P2 |
| 2 | LED | LEDs:LED-0603 | D1, D5 |
| 2 | MMZ1608B601C | SMD_Packages:SMD-0603 | FB2, FB4 |
| 2 | PRTR5V0U2X | opendous:SOT-143B | U7, U9 |
| 2 | SRF2012 | srf2012:SRF2012 | TR1, TR2 |
| 1 | 100k | SMD_Packages:SMD-0603_r | R15 |
| 1 | 1k | SMD_Packages:SMD-0603_r | R19 |
| 1 | 2.2uF | SMD_Packages:SMD-0603_c | C12 |
| 1 | 576 1% | SMD_Packages:SMD-0603_r | R16 |
| 1 | 5V_IN | Connect:BARREL_JACK | P5 |
| 1 | 5V_IN | Pin_Headers:Pin_Header_Straight_1x02 | P4 |
| 1 | BATTERY | Pin_Headers:Pin_Header_Straight_1x02 | BT1 |
| 1 | BSS138 | SMD_Packages:SOT-23 | Q1 |
| 1 | BZT52C5V6 | sod123_inv:SOD123_INV | ZA1 |
| 1 | CARD_DET | Pin_Headers:Pin_Header_Straight_1x02 | JP1 |
| 1 | FT232RQ | SMD_Packages:QFN-32-1EP | U8 |
| 1 | FWR_RCVR | Pin_Headers:Pin_Header_Straight_1x02 | SW3 |
| 1 | INTEL_EDISON | intel_edison:INTEL_EDISON | U2 |
| 1 | MIC2039EYMT | dfn6:DFN6_2x2mm_0.65Pitch | U6 |
| 1 | NCP1117ST18T3G | SMD_Packages:SOT-223 | U12 |
| 1 | NCP1117ST33T3G | SMD_Packages:SOT-223 | U11 |
| 1 | POWER_BTN | Pin_Headers:Pin_Header_Straight_1x02 | SW1 |
| 1 | PWR | Pin_Headers:Pin_Header_Straight_2x04 | P3 |
| 1 | RCVR_MODE | Pin_Headers:Pin_Header_Straight_1x02 | SW2 |
| 1 | SD-CON | microsd:MicroSD_Hinged | J3 |
| 1 | ZX62-AB-5PA | MicroUSB-ZX62AB&B-5PA:USB_microAB_ZX62-AB&B-5PA-11 | J1 |
| 1 | ZX62-B-5PA | MicroUSB-ZX62AB&B-5PA:USB_microAB_ZX62-AB&B-5PA-11 | J2 |
Questions
How big is the Edk PCB?
It measures 88.9 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Edk use?
87 parts, built around the FT232RQ, TXB0108PW, PRTR5V0U2X and MIC2039EYM-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Edk KiCad files?
From the ciaa/Hardware repository on GitHub, at the commit this page was made from: the board is PCB/EDU-INTEL/edk.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Edk design in my own project?
Its repository states no licence, so its author keeps all rights: ask ciaa before reusing the design.
More from ciaa/Hardware
11- 4 layers136.6 × 84.2 mm
- 4 layers138.6 × 86.2 mm
- 4 layers138.7 × 86.2 mm
- 4 layers134 × 81 mm
- 2 layers95.9 × 90.2 mm
- 2 layers85.5 × 136.8 mm
- 4 layers71.1 × 99.7 mm
- 2 layers80 × 60 mm
- 2 layers51 × 30 mm
- 2 layers18.8 × 51.8 mm
Similar boards
- 2 layers57.4 × 45 mm
USBCableIsolatorCircuit
brengi/CESE-PCB
Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos
67 parts7 - 2 layers20.4 × 32.3 mm
Stm32f0..f breakout
electroniceel/stm32f0..f-breakout
STM32F0..F (TSSOP20) Breakout Module
35 parts2CC-BY-4.0 - 2 layers61.5 × 25 mm
- 4 layers36 × 26 mm
Nina project
slemanz/nina-project
Integrated hardware and firmware solution for a data acquisition device based on the u-blox NINA-B306 (nRF52840) Open CPU.
43 parts4MIT - 4 layers90.2 × 101.1 mm
- 4 layers25.6 × 38.6 mm
- 2 layers54 × 47.5 mm
PCB updi unbricker
k-takata/PCB_updi_unbricker
UPDI High Voltage programmer for AVR Dx/Ex and ATtiny series
63 parts - 4 layers240 × 130 mm
TTF Base
dermatoid-collab/EVC_FW
Progetto hardware e firmware del sistema di controllo di un ascensore domestico a trazione (TTF) di LiftingItalia s.r.l. Quattro schede basate su STM32F446, collegate in CAN; il motore è comandato da un VFD.
420 parts